>Does anyone know what the present status is for the production of new Glaser gouges, or who still sells them? I was asked this question at our last turner's meeting this past Sunday, I didn't know if CET was producing any recently, or even what vendors still offer them today.
The availability of these gouges over the past 2 years or more has been so sporadic that it's hard to advise anyone on how to obtain one. I am extremely happy with my 5/8" 15V, so I've not been monitoring this situation very closely. I do know that Brad Packard had to remove them from his catalog since he could not reliably offer them to his customers because they were being produced very slowly, if at all.
Does anyone have an update on what's going on at CET, or have Glaser gouges gone extinct?
>Not sure about why the shortage of the Glaser gouges. I do love mine. Stuart Batty has his new line comming out soon. I would bet they will be excellent tools. I do have to say that my next replacment gouge will be one of the Thompson gouges. I've heard nothing but good things about his.
>I don't know the status of the Glaser Gouge production, but they are currently available from Highland Woodworking (800-241-6748) here in Atlanta, Georgia.
>Glaser is not extinct, matter of fact they produced a batch of screw chucks not long ago. Give them time... I'm sure they will start producing tools again.
The price of this steel (A11) took a huge jump about 6 months ago and has been rising every month, I could only imagine what 15V is selling for now. My suggestion is look for used 15V tools.
I did talk to Stu Batty at Richmond, he did say his line of tools will be out in the fall but I haven't heard anything else.
I agree that Doug's tools are excellent (I already own three of them, and when our club puts a "Thompson" order in later this week, I'll have two more), but some folks really like the wonderful Glaser handle and excellent cutting tool combinations that evolved under Jerry's watchful eye while he was producing them. It's a shame that the production of these tools has been compromised in recent years. There's no way I'd part with my 15V, and do what I can to grind it the absolute minimum each time I have to sharpen it. This is probably the reason why you RARELY see a Glaser gouge offered as a second-hand item.
I hope we'll get to see a preview of Stu's tools at the AAW Symposium in Albuquerque this coming June....
Thanks for the information - I'll pass it on to those members of our club that were asking about it!
>I attended a Stuart Batty class last weekend and he talked a little about his line of new turning tools. He had originally planned to be making them by now but because of the doenturn in the economy, his investors had decided to hold off a while so there would be a delay in their "debut".
>If memory serves me right Doug Thompson was a huge fan of Jerry Glaser and used his tools exclusively and when Jerry sold the company and Doug needed tools the prices had sky rocketed. This led to Doug making his own tools, now that was a huge break for all who are using Dougs tools. In my humble estimation there is not a better tool for the money out there and myself will never see the need to get one from the company that bought Glaser tools. I'm not involved with Doug's company I'm just a very satisfied user and I don't know anyone in the turning community that is as generous as Doug is. Try em, you'll love em!
>I have to agree with Bill and others here. Why bother with Glaser when we have Thompson. Doug uses the same steel (except for the 15V) and produces them himself. You can put any handle you want on them and have wonderful tools.
But in Doug's web site, 13 tools are available; 15 are sold out.
I don't know what is the reasons for the sold out. The demand is greater than what Doug can produce? The shortage of steel? which I doubt. I believe there was huge price increase but not shortage. Doug over predicted the slowing down of the economy and cut back too much on his production?
The Thompson bowl gouge (the only tool then) was debuted here at WoodCentral with no fanfare.
Definitely there will be some who would delay the purchase of any discretionary items. I think we are still hungry for the best tools at a bargain price.
>Thanks, this did start as a mention about making tools years ago here on WoodCentral then Mark Kauder's test against the others tools basically started this whole thing. I working right now to cure the problem with supply and demand, matter of fact Friday I'm looking at another mill (in MI and Made in America) so two can run at the same time.
I am sorry to hear that news about Stu, he has to many good ideas like the negative rake scraper to sit, I'll contact him.
The economy will be fine and recover like we've done so many times before.
>I have a 5/8" V-10 (Red Handle) bowl gouge that I bought at the Louisville AAW Symposium, that I am extremely happy with. I have not a clue whether they are being produced now or not.