Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

another Question About Thread Chasers

Posts

another Question About Thread Chasers

#1

another Question About Thread Chasers

Barbara Gill, Remlik VA

>With tongue and groove bits, sharpening is really not an option for a continued good snap fit. The tongue will get smaller and the groove larger. That is why we use custom disposable knives for our flooring.

How about thread chasers? Is there the same potential for problems?

Re: another Question About Thread Chasers

#2

Richard Allen

Re: another Question About Thread Chasers

Richard Allen

>Hi Barbara,

Just hone the flat top surface of the chaser. There is no point in sharpening the groves, The groves "guide" the chaser but the top edge scrapes the threads into the wood.

Re: another Question About Thread Chasers

#3

Thanks

Barbara Gill, Remlik VA

>That makes more sense than sharpening those little "v's". :-)

It was an academic question as I don't have a thread chaser.