Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Need to make a simple 4' stand

Posts

Need to make a simple 4' stand

#1

Need to make a simple 4' stand

adrien

>I've been asked by a friend to make a simple stand that he can place a sign on for his restaurant: About 4 to 4 1/2 feet high. Given the size of my lathe, and supply of wood, I'll have to make it in three pieces plus a base.

I've no problem designing a base for the pole, but since I'm basically a bowl turner, have little sense of what the pole should look like. I can probably hack out the necessary coves and beads if someone would kindly suggest what it should look like.

Anyone know of a simple post design that I could copy????

Re: Need to make a simple 4' stand

#2

Re: Need to make a simple 4' stand

Rick Allen

>The focus should be on the sign not the woodturning. Make the post as simple as you can with beads at the top and bottom of each section to hide the fact that the post is in multiple pieces. If you can make each section progressively smaller (first section 1' 10" long, second section 1'4" long and top section 10" long).

Draw on a piece of paper what you want the post to look like and decide from you drawing which design looks best. Designing something like this on the lathe will work but your outcome will be a lot more to your liking if you design on paper first. You can be very precise in your drawing or you can have only a few measurements in your drawing.

Perhaps something as simple as this drawing.


img

Re: Need to make a simple 4' stand

#3

Thank you Rick.

Adrien Coblentz

>Thank you Rick. Very thoughtful. I like the KISS idea and will give it a go.

Re: Need to make a simple 4' stand

#4

Steven Antonucci

Simple plan

steve antonucci

>Go to the local home store, and find a bannister section to copy. Depending upon the overall design of the sign and how much effort you need to put into it, you could go from plain and simple to something much more elegant.

Catch up with me at meetign Monday night if you want to sketch out some ideas...

Steve

Re: Need to make a simple 4' stand

#5

Re: Need to make a simple 4' stand

Texian

>Simple would be a piece of galvanized electrical conduit set in a coffee can of concrete.