Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Interesting piece of burl

Posts

Interesting piece of burl

#1

Interesting piece of burl

ILYA ZAVORIN

>I came across an interesting piece of (I think) burl. It has formed at the end of what looked like a short limb that was growing directly from the root ball of a very large tree (maple or oak, I am not sure). It has an interesting shape. The first comparison that came to my mind was the face of the Elephant Man.

Now I am trying to figure out what to do with it. It seems to be pretty solid. It's not very big: the floor tiles on the photos are standard 12"x12". Do you think this is a good piece for turning? Is it possible to perform any type of "nondestructive testing" to figure out if it's worth putting on a lathe?


img

Re: Interesting piece of burl

#2

Re: Interesting piece of burl

Norm Smith

>Ilya,

You have nothing to lose. Give it a go. You should have lots of natural voids in whatever you turn.

Good luck.

Norm

Re: Interesting piece of burl

#3

Re: Interesting piece of burl

Ken

>First off I would wash the pieces real good an check for any kind of small rocks an dirt that may be lodged in there.2nd and this is only a suggestion,but maybe you could use those handles on them to clamp in the headstock some way then bring up the tail stock against the piece and then round it off to see what you have.Looks like you could end up with some nice wood.Show some pics if it turns out good for you.

Good luck

Ken

Re: Interesting piece of burl

#4

Re: Interesting piece of burl

Thad

>I had a piece like this a while back. My dog had actually brought it out of the woods into the yard.

Through it on the lathe and ended up repositioning it so much all I was left with was a bottle stopper.

But it is the most unique stopper I've made to date.

Give it a spin.

Re: Interesting piece of burl

#5

Lyle Jamieson

Re: Interesting piece of burl

Lyle Jamieson

>Ila, I think this piece would be of no value at all. You should send it to me and I will dispose of it for you;-) Lyle

Re: Interesting piece of burl

#6

Steven Antonucci

Burl ladle/scoop

steve antonucci

>Can't get an overall sense of size, but I'd turn a handle from the log section and a scoop from the burl section.

Steve

Re: Interesting piece of burl

#7

Re: Interesting piece of burl

ILYA ZAVORIN

>Thanks Thad. Why did you have to reposition it so much?

Re: Interesting piece of burl

#8

Re: Interesting piece of burl

Thad

>Like Norm said, voids kept appearing. I should have just left it where it started and let the voids be character, but I thought repositioning would produce a better result. I was wrong.

Nothing seemed unstable, it just wasn't what I had hoped was on the inside and had designed for.

A lesson learned.