Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

What makes you decide to attend a Symposium?

Posts

What makes you decide to attend a Symposium?

#1

Steven Antonucci

What makes you decide to attend a Symposium?

steve antonucci

>Based upon the thread started below, I thought it might be an interesting topic for discussion.

What makes you attend a particular symposium?

Is it the line up? Are there folks that you consider "can't miss?"?

Is it locations proximity to home? Proximity to other things? Would you bundle it into a vacation?

Is it the venue? Would you go to Las Vegas or Orlando (two venues where the venue is an attraction outside of the event)?

Is it the opportunity to interact with other turners you don't know? Meet people face to face you may have met via the internet?

Let's hear what makes people leave the shop for 3 days!

Steven

Re: What makes you decide to attend a Symposium?

#2

Re: What makes you decide to attend a Symposium?

Randy G

>Right now, due to money, I go to ones close in proximity.

As I'm getting into woodturning and the Symposium's I'm looking more at proximity to a place I can arrange inexpensive lodging to help keep the costs down. I haven't been to a symposium I haven't learned a ton at, and sometimes it's the lesser known names that I learn more from which is always fun.

Re: What makes you decide to attend a Symposium?

#3

Re: What makes you decide to attend a Symposium?

mpax356

>My interest is based on a passion for learning more about turning.

I have been to two turning symposiums, one local and one a couple of hours away. I always bring back some new project idea to explore. I enjoy shopping the vendors and always seem to find some wood or a new tool. I frequently learn some trick or technique from engaging in some conversation with the turner sitting next to me at the demos. Seeing the gallery items is also an inspiration for stretching to new things. I generally take copious notes that I am able to refer back to.

Re: What makes you decide to attend a Symposium?

#5

Depends

Jim Shaver - Oakville, Ont

>Depends on distance, time and if there is any one I want to see...lately I am not interested in seeing anything that is "popular" or certain people....

Take it easy,

Jim

Re: What makes you decide to attend a Symposium?

#6

Re: What makes you decide to attend a Symposium?

Neal Addy

>I'd like to say proximity isn't important but it is. How many working folks can give up 5 days (including travel time) to attend a big 3 day event half a country away.

Aside from proximity, the key draw for me is vendor participation and a chance to meet fellow turners. I enjoy getting to see a big-name turner but more than likely I'm able to get more from their DVD than from an hour (or so) symposium demo.

Re: What makes you decide to attend a Symposium?

#7

Re: What makes you decide to attend a Symposium?

Wally Dickerman in Arizona

>I attended the first 7 AAW symposiums, starting in 1987 in Lexington, Ky. All were in different parts of the country. At each, my wife and I spent 2 or 3 weeks traveling around the area, seeing parts of the country that we hadn't seen before. I demoed at a couple of them. At the second, in Philadelphia, we spent a month touring 10 states. We met and visited a number of turners along the way. In those early days, turning, as we know it today was just getting started. It was great fun meeting and visiting with many of the turners that I had only read about.

My favorite parts of the symposiums are the Instant Gallery and the Trade Show. I skip some of the rotations to spend time at both.

The symposiums have become a social thing for me. I enjoy meeting old friends and making new ones.

Wally

Re: What makes you decide to attend a Symposium?

#8

Steven Antonucci

Answering my own question:

steve antonucci

>I originally thought that it would be largely to see "famous turners" in action, but I have to say that I'm less interested in the demos that I am in other things. As others have mentioned, it's the opportunity to walk the instant gallery, meet new friends and renew old acquaintances, and put your hands on products in the vendor area that really attracts me.

More so, the idea of becoming completely immersed in turning for three days with folks from all walks of life! If I get a couple of minutes during the week, or a couple of hours on a weekend, that's a lot. To know that I have three days to absorb and learn at whatever pace I choose is my #1 driver.

I will say that the venue is also a big piece of my decision process. I'm a lot more likely to go to Albequerque next year than Richmond, even though Richmond was closer. Richmond was just far away enough to "not drive" with gas being so expensive. Hartford is a 100% guarantee. Albequerque is (I think) a possibility simply because of my love of the desert, even though I don't get there much any more. (We need to get an AAW in Las Vegas to see what it does to attendance. My former company did it one year and the attendance doubled for our annual conference!)

Looking forward to Totally Turning 2009...

Steve

Re: What makes you decide to attend a Symposium?

#9

JL

Re: What makes you decide to attend a Symposium?

JL

>"What makes you attend a particular symposium?"

"Is it the line up? Are there folks that you consider "can't miss?"?"

Part of it is the line-up. I mostly turn spindles - so I look for techniques that will enhance my spindle turning.

"Is it locations proximity to home? Proximity to other things? Would you bundle it into a vacation?"

This is big for me - I don't like flying that much (I'm allergic to lines and airport). I prefer driving. Proximity to other attractions (camping, hiking, etc.) is a big draw. Yes, I'd bundle it with a vacation.

"Is it the venue? Would you go to Las Vegas or Orlando (two venues where the venue is an attraction outside of the event)?"

Venue - I'm not interested in the venue at all.

"Is it the opportunity to interact with other turners you don't know? Meet people face to face you may have met via the internet?"

Of course.

I prefer more in-depth symposia. I would rather attend a several hour slot than a 1 hour demo. I prefer smaller venues to larger ones. I like being able to see.

Re: What makes you decide to attend a Symposium?

#10

Re: What makes you decide to attend a Symposium?

davidwalser

>Good question. The primary reason for attending a symposium is the chance to learn new things, so the demonstrators (and the topics they'll be addressing) is the primary factor. It was great to sit within feet of Kip Christensen as he turned a lidded box and to listen to Malcolm Tibbetts explain his approach to segmented turning. You can't get that kind of variety outside of a symposium. For skill building, you can't beat a good one-on-one instruction session. For the shear wealth and breadth of information, you can't beat a great symposium.

A close second is the vendors. I like seeing all the new tools and getting a chance to speak with the vendors. I bought a Tormek because I had a chance to see it up close, watch it being used, and to question the expert. I bought a bunch of stuff from "The Sanding Glove" people because I was able to try the glove on and it just felt right. I bought..., well, let's just say these symposiums can be expensive.

Location is not an irrelevant factor, but it's not a draw for me. If I'm going to be inside watching demos, why should I care what it looks like outside? Unlike Wally (and others who are retired), it's hard for me to take the time off work to attend a seminar AND have a sight seeing vacation.

Re: What makes you decide to attend a Symposium?

#11

Re: What makes you decide to attend a Symposium?

john lucas

>For me it's 2 things. Time and money. I love to be around other turners and turning stuff so I would go to lot of them if I could. I go to the close ones because they are all I can afford. I go to the larger ones if I can demo because it's the only way I can afford it.

I use to go to see particular turners and I still enjoy seeing their techniques because you always learn something. Now I go just to see and make new friends. I've found that I will skip a demo just to hang out and talk.

Re: What makes you decide to attend a Symposium?

#12

Re: Answering my own question:

davidwalser

>

...I will say that the venue is also a big piece of my decision process. I'm a lot more likely to go to Albequerque next year than Richmond, even though Richmond was closer. Richmond was just far away enough to "not drive" with gas being so expensive. Hartford is a 100% guarantee. Albequerque is (I think) a possibility simply because of my love of the desert, even though I don't get there much any more....

Well, what are you doing next February? We've plenty of desert to go around and we'll be having what we like to think of as a pretty fine symposium. Love to have you. Desert Woodturning Roundup (/commercial)

Re: What makes you decide to attend a Symposium?

#13

Re: What makes you decide to attend a Symposium?

Stuart Johnson

>Instant gallery and vendors are what I go to see. Which brings up what is a minor irritant. I've only gone to the last four or five SWAT but have run into the same thing at each. The instant gallery will normally have a rather large area in front before you get to the tables. Why won't folks that want to socialize gather there rather than in the middle of narrow aisles between the tables? I rank this about par with getting off an escalator or out of an elevator and stopping to decide which way to go while the folks behind you are piling up.

Back to the pluses of the I.G. It is neat to see a piece that has been described here or on one of the the forums. Some are much smaller and others larger than the size the photo appears to show. Yet, they are always nicer. Thanks to all that post and show in the I.G.

Re: What makes you decide to attend a Symposium?

#14

Re: What makes you decide to attend a Symposium?

NickTuzzolino

>See you there, Troy. I went to the last one and thought it was great!!. It's a pleasant drive from L.A. Nick

Re: What makes you decide to attend a Symposium?

#15

Re: What makes you decide to attend a Symposium?

NickTuzzolino

>Just because I can. Being a widower, I pretty much do as I please. I live in L.A. and attend the Arizona Desert Wood Turning Roundup and go to Craft Supply's symposium in Utah. Both are great. I drive to Ariz and fly to Utah. Next month Mark Adams' School is putting on, for the first time, a solely segmented 3 day seminar. I am into segmented pretty much, so I'm going to fly to Indiana. I'll most likely go to Albuquerque next year, also.

Re: What makes you decide to attend a Symposium?

#16

Keith Tompkins

Re: What makes you decide to attend a Symposium?

keith tompkins

>Hi Steve, lots of reasons, but here are the best reasons, for me, to attend:

1. Put pieces in the instant gallery. Anyone can do this, and I encourage it, even if it's your first symposium.

2. study the pieces in the instant gallery, esp. at the national level. You will learn more than watching all the demo's combined.

3. Tour the vendor area...many, you gotta love going home with a few tools and blocks of wood.

4. I don't attend too many demos, refer to 1-3.

5. The best reason is if you are doing your own rotations! THAT will get the adrenanine pumping!

Re: What makes you decide to attend a Symposium?

#17

Re: What makes you decide to attend a Symposium?

keith zimmerman, Normal IL

>I like to go and see the IG for the inspiration that it instills. I also like to see the vendor area and perhaps maybe spend just a little money on tools or wood (yeah right, a little?)

The demonstrators are important to me as well, but I usually try to see the people that demonstrating something I am interested in. Last, but definitely not least is seeing friends, and maybe even making some new ones. Location is not a big deal, I love to drive and usually drive wherever I go. I've been to Georgia, Virginia, Kentucky, Indiana, and Minnesota for events, including AAW symposiums. I already have Albuquerque on my calendar for next year.

keithz

Re: What makes you decide to attend a Symposium?

#18

Re: What makes you decide to attend a Symposium?

Stephen Mushinski

>Interesting question Steve!

For me in no order -

To see some of the wonderful people I have met in the last few years I have been turning and make new friends.

Vendor area.

Instant gallery.

Demo's that deal with design and thought process.

Demo's which are new to me (Could be the Person or the Process).

Travel to area's of the good old USA which I might never have chosen to go if not for the moving show. ( Wasn't going next year to AAW but when my dear wife found out it was in New Mexico guess what if funds are available we will be there now. Did I tell you how much I love my wife :) )

Re: What makes you decide to attend a Symposium?

#19

Re: What makes you decide to attend a Symposium?

Michael Stafford

>As someone who has attended a grand total of two symposiums I am barely qualified to reply.

The first symposium I attended was a regional affair. I did not know what to expect. I had seen very few people turn in person except at Saturday demos at the woodworking stores.

But getting to see how people manipulated and held the tools was a tremendous learning experience for me. Asking questions of experienced and big name turners helped me understand much more about the entire process.

In Richmond I was able to see the big names turn boxes and that was a wonderful thing for me to see as it was the first time I had ever seen anyone turn a box except in a video. I had taught others to turn boxes but had never had anyone teach me how to turn one.

Getting to see instant galleries of work was very enlightening and inspirational. It allowed me to understand even better the quality of finish and form that can sometime be appreciated best in person and not just in a flat screen photo presentation. Seeing the actual size of the pieces also made a tremendous impact on me.

I also enjoyed the vendor areas immensely. Seeing highly skilled pros up close and personal and actually having them show you how to make the cuts was worth the price of admission alone.

The exchange of information can be an overload to someone who has so much to learn but symposia are a great way to advance your skills and your knowledge.

But perhaps as much as anything getting to meet so many great people who also happen to be wood turners makes symposia worth the time away from the shop. I think the social aspect of a symposium is also a good reason to attend.

I don't think I can afford to attend them all but those that are within the reach of my pocketbook will see me taking in all that is offered.

Re: What makes you decide to attend a Symposium?

#20

Good Thread Steve !

Don Orr

>I'd like to be able to go to them all, however I am not wealthy or retired so I am very limited. Never been to a national event except to drive to Providence for a day to see the IG and vendors-had a great time. I've only been to our local symposium and then as a volunteer or demonstrator.

What would get me out of my area would be proximity first for financial reasons. Demonstrator lineup would be important. I really enjoy Instant Galleries and vendor interaction. As many others have said, just being in and around turning and turners for several days is just plain fun. There is so much to see and learn at these events it can be overwhelming but well worth it.

I also need permission from the wife. She may actually come with me if we can do something extra in the area so venue/location could be a factor. I REALLY doubt she would be interested in Vegas !

I hope to be able to go to Hartford in 2010.

Re: What makes you decide to attend a Symposium?

#21

PEOPLE

Bill Turpin in WNC mountains

>I love to meet the people from WC. TD's gathering, WC lunch at Louisville, and 2008 Five Barns are at the top of the list. We have been to Fla symposium twice, we love the smaller atmosphere of 350 turners. Also the fact that you stay on campus.

We were exposed to Hunter tools at Louisville, this revolutionised my wife's turning. The vendor areas are very valuable. The IG is less valuable: too much wood is covered with paint, burning, carving, etc.

Bill