Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Sharpening scrapers, OT, kinda

Posts

Sharpening scrapers, OT, kinda

#1

Sharpening scrapers, OT, kinda

adrien

>Almost all the articles I've seen offering advice on how to set about sharpening scrapers deal with rectangular ones. That has never been a problem for me. But the one with a French curve is something else. Anyone know of helpful article for sharpening one of those curvy beasts?

Re: Sharpening scrapers, OT, kinda

#2

Re: Sharpening scrapers, OT, kinda

Ken Oakley-Sunny St. Cloud, Fla

>I sharpen all my homemade scrapers on a belt sander. Works for me.

Re: Sharpening scrapers, OT, kinda

#3

Re: Sharpening scrapers, OT, kinda *LINK*

John K Jordan

>I sharpen my curved cabinet scrapers on the Tormek with the flat rest. Sharpening the inside curves of the curved one is a problem - I used a small file for the inside curves once but then I figured why bother since I never scraped with that portion anyway. I raise the cutting burr with the side of a 1/4" spindle gouge.

BTW, my favorite cabinet scrapers for turning are a set I found on the shelf at Highland Hardware. (link) They were cheaper at the time but they are so useful I still might buy them at today's price although it would be cheaper to grind similar curves from rectangular scrapers. I use them on the inside and bottom of nearly every bowl and lid I make. They are thinner than most cabinet scrapers.

JKJ


small curved scraper set

Re: Sharpening scrapers, OT, kinda

#4

Thank you both. It's a start.

adrien

>

Re: Sharpening scrapers, OT, kinda

#5

Re: Sharpening scrapers

Brian Hahn in SW Wisconsin

>My cabinet scrapers are old thick ones made from HSS. I shape them on the grinder like turning scrapers, refine the edge with diamond hones and raise the burr with a burnishing tool. (The scrapers are hard enough to cut most other tools.)