Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

thompson skew

Posts

thompson skew

#1

thompson skew

robert davis

>just obtained a 3/4 skew. what fixture do you use to duplicate grind?

Re: thompson skew

#2

Re: thompson skew

John K Jordan

>I think Doug uses a Wolverine on a K46 wheel to do the rough grinds on the skews. I sharpened several by hand just using a flat tilted Wolverine table on the grinder (I tried the Wolverine skew fixture and didn't like it) and one on the Tormek using the skew jig.

JKJ

Re: thompson skew

#3

Re: thompson skew

BobM

>I use the flat tool rest on the Wolverine also and sharpen it at 40 degrees. The bevel is 1 1/2 times the thickness of the steel.

Re: thompson skew

#4

Re: thompson skew

Chuck Engstrom

>I agree with John about using the Wolverine flat tilted table -- the simple direct solution that works fine. Don't forget that ANY fixture is meant to be a guide only and won't prevent you from changing shape etc if you get too aggressive.

I've had one of Doug's 3/4" skews for several months now and like it very much. His rough grind was 45� and that's what I have stayed with.

Best--

Chuck Engstrom

Re: thompson skew

#5

Re: thompson skew

robert davis

>thank you all

Re: thompson skew

#6

thank you all

robert davis

>

Re: thompson skew

#7

Free Hand

Jorge Castaneda ~ Downeast Maine

>If you are obsessive about jigs , I'll post a picture of the one I devised before I was confident in my own hands.

Let me know

Jorge

Re: thompson skew

#8

Re: Free Hand

John K Jordan

>Jorge,

I'm obsessive about almost everything - I know I'd like to see your jig, if only for the education.

JKJ

Re: thompson skew

#9

me too,

robert davis

>