Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Wine coaster & bottle stopper

Posts

Wine coaster & bottle stopper

#1

Wine coaster & bottle stopper

HeatherA in AK

>Hello, here is the last of the project for my kid's school auction. It is a mahogany wine bottle coaster and bottle stopper set. It is going in a "date night" basket. Thanks for looking!

Heather


img

Re: Wine coaster & bottle stopper

#2

Re: Wine coaster & bottle stopper

Cyril Griesbach

>Nicely done, Heather.

Re: Wine coaster & bottle stopper

#3

Re: Wine coaster & bottle stopper

Bob Edwards

>Nice looking set Heather. What is the finish? That coaster is going to get very wet!

Re: Wine coaster & bottle stopper

#4

Re: Wine coaster & bottle stopper

HeatherA in AK

>Bob, the finish is 3 coats of deft on the lathe then 3 coats of watco teak oil (which I understand is an oil/varnish mix) finish off the lathe, then buffed with carnuba wax. Not being a wine drinker myself (Baptist kids going to to a Lutheran school!) I was just thinking it would get a few drips of wine every now and then. Will there be that much problem from condensation? The wine coasters that I saw on the internet were silver with wood inserts in the bottom so I figured that wood would be OK. I can bring it back home and but a couple of coats of Poly on them if that would hold up better. The auction is next Friday.

Thanks,

Heather

Re: Wine coaster & bottle stopper

#5

Re: Wine coaster & bottle stopper

John K Jordan

>Looks like a top hat! I love those Ruth Niles stoppers. I don't normally drink either, but I make quite a few of these as presents.

I asked a similar question about finishing stoppers once and never did get a good answer. I usually use shellac-based friction polish on small things but alcohol will dissolve that.

One person said to use no finish - just buff the wood (which would work better for some species than others.) I watched a demonstrator once who used CA glue as a finish for stoppers. I finished my last one with multiple coats of deft, sanded to 1000, rubbed with steel wool.

JKJ