Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

On the subject of CA glue...

Posts

On the subject of CA glue...

#1

Steven Antonucci

On the subject of CA glue...

steve antonucci

>I am one of those guys. No question about it. I might see something I need, and be to darn cheap to buy it until I get a minute to make it.

As turners, we all use CA glue. The tips get clogged and it's a pain. Some folks sell replacement tips. One company sells these things called "Cherry Pickers". They are wooden balls with a needle tip to clear the clog.

Well, duh! I can make that! All I need is a needle and a ball. I have some balls from the craft store, and a package of 40 needles cost the same as one Cherrypicker... did I mention duh?

So I start by drilling a small hole and either CA glue or epoxy the needle into hole. Works perfectly, but I decide to start making better ones. So I glue a bead (from Ebay) and turn a little doodad. Then, a Bead with a bigger doodad (needle is broken in #3, I'll redo). Lastly, a little skew practice and longer finial doodad.

Who said that the needle had to be on a red ball?

Insert into the CA tip, and you are clear to glue...

Steve

P.S. The catalog gets $3/ea for these...plus S&H!


img

Re: On the subject of CA glue...

#2

Re: On the subject of CA glue...

Texian

>You just gotta admire and appreciate a man who will take a few minutes to make a tool and save $3 plus probably $7 shipping. I certainly do. But then you gotta wonder, if the first one worked perfectly, why did he make another one, and then another one?

About 20 years ago I made a crude rack for a set of Stanley chisels. My design was published in a national woodworking magazine and they made a very nice example to show in the magazine. I still have the one and only original, still holding the original chisels (which are used from time to time). The first one worked, so there was no need for another.

Re: On the subject of CA glue...

#3

Dick Hines

Re: On the subject of CA glue...

Dick Hines

>Steve, if you leave the top off and give the bottle a little squeze after useing the CA that wil help with the tip pluging up.

The first thing I do when I open a new bottle of CA id toss the top.

Re: On the subject of CA glue...

#4

Steven Antonucci

Something to do...;-)

steve antonucci

>After all, they don't sell sewing needles in single packs! I have 40 of these things to use up, so I take a little piece of wood, and make one. I'll probably give them away at club functions and/or to friends.

Plus, they're good skew practice...

Steve