douglas fir?
Eric in Los Gatos
>Anyone have any thoughts on turning douglas fir? I have access to some good chunks for free. Seems that they might at least worth while for practice.
Any insight would be appreciated.
Thanks,
Eric in Los Gatos
Knowledge You Can Build On — Est. 1998
douglas fir?
Eric in Los Gatos
>Anyone have any thoughts on turning douglas fir? I have access to some good chunks for free. Seems that they might at least worth while for practice.
Any insight would be appreciated.
Thanks,
Eric in Los Gatos
Re: douglas fir?
wooden leg
>I turn it for practice and for making outside toys for kids. Keep your tools sharp. I have not had good luck hollowing but that could just be me. Have fun. Dave
Re: douglas fir?
Lynn from Port Townsend------WebKitFormBoundaryL8M
>The bowl on the cover if the 2008 AAW Resource Directory is Douglas Fir. I personally have tear-out problems when I turn it.
Re: douglas fir? *LINK*
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
>It is soft and difficult to turn because of tear out --- BUT
Have a look at what Bill Luce does with it, either by finishing it naturally, or sandblasting it.
http://www.billluce.com/
http://www.billluce.com/
Re: douglas fir?
Sam Scalzo
>We have a contest once a year in our club to turn a 2x4-16" long. You have to keep your tools very sharp because of tear out. I did a pair of candle sticks and they came out ok. Some of the other members did bowls. Very neat turnings show up. There is much better wood out there. But when it is free that is another story. Have fun and good luck. Sam
Re: douglas fir?
JohnKyler
>I had to turn some balls once from DF. It was the only material that met the specs of the job (one piece and 8x8x8). I found some that was kiln dried. While turning it, sap was stringing off it like cotton candy. Biggest mess I have ever seen and all over the lathe and shop. If someone gave me more of it... FIREWOOD.
My mantra: life is too short, to turn plain wood.
John
I take all free wood (once)
steve antonucci
>You have nothing to lose by loading the truck one time. You may or may not have some success with it (today), and it may be something you never come back to.
Then again, it's free so why not?
Steve
Re: douglas fir?
Kelly Robison
>Living here in the Northwest; we have alot of fir, cedar & spruce. I have tried to turn these and have only had success with things that don't have to be "hollowed out". The fibers are very course and soft. I tried making bowl and it looked nice until I was done; then it cracked terribly and it was dry wood. My advice; if it's FREE, try it & see. all you lost is some time spent on the lathe.