Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Thompson Skew

Posts

Thompson Skew

#1

Thompson Skew

BobM

>I recently got a new 1/2" Thompson Skew for doing ornaments. I put it to use this weekend. What a great tool!! I was using it on Walnut boxes rather than ornament finials. Walnut normally dulls a skew pretty quickly, but not this one. When you sharpen it, it is really sharpe and holds a great edge. I also have his 3/8", 1/2" spindle gouge and detail gouge. I'm sold on his tools! They are the best. BTW, I'm not affiliated with Doug Thompson and have no financial interest in his business, just a very happy customer.

Re: Thompson Skew

#2

Me to Bob

Dave Peebles Lyons, Ohio!

>Hi Bob,

I just received the 1-1/4" skew from Doug yesterday. It is a real beauty.

When I took it out of the package it reached out and bit me. I know Doug says he doesn't really sharpen them... but the little trickle of blood tells me it was pretty sharp. :) God, I love when that happens!!

To make this even better, my neighbor brought over a piece of Walnut that he thought was Oak. He needed a 7/8" spindle turned for a paper towel holder to go with his new kitchen cabinets.

I found a piece of Red Oak to meet his needs and in a few minutes fixed him right up. The skew was the tool of choice... and it did not let me down. He was happy, and I was happy.

It was been a few years since I had done any spindle work, but it seemed like riding a bike, it all came back to me.

Great tool from a great guy,

Dave

Re: Thompson Skew

#3

Re: Thompson Skew

Fog Tanner

>I have been using the Thompson skews for over a year now. I use the 1/2", 3/4", and a 3/8" round skew. I use a Tormek for almost all my turning tools, especially the skews. I typically sharpend them at the 1000 grit and then hone them on the leather wheel to start with. After that I alternate just going to the leather wheel every other time. I have done the same thing with my M2 skews, but found that the Thompsons like the fine grit and honing more than the M2.

These are my go to tools right now, having both spindle and bowl gouges. The only problem with them is I don't have more - would be nice to have 4 each of the sizes/flutes I use....

Fog

Re: Thompson Skew

#4

Re: Thompson Skew

John K Jordan

>BobM,

I agree. I've been using the 1/2" and 3/4" skews for a little while now and they are great. I do think that the 1/2" is a little too long for the slender spindles I like to do (holding the skew by the metal with the right hand while steadying with the left) but I plan on remounting one a little deeper in a handle just for that.

When I first got a few bowl and detail gouges from him I was sold on the metal. I also sharpen on the Tormek then hone with a super-fine diamond lap to refresh the edge as needed. I found that these tools required honing less often than my best crown and sorby tools. Sharpened this way, there is enough steel for at least 3 or 4 generations of turners! Maybe we ought to get Doug to autograph these to increase their value a hundred years from now. [g]

BTW, I'm also not associated with nor do I profit from Doug's sales, but a friendly warning - he or she who wants his skews might get them while the gettin's good. Doug mentioned that skews and scrapers are such a pain to make that future supplies may be limited!

JKJ

Re: Thompson Skew

#5

Re: Thompson Skew

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>I am also a great supporter of Thompson tools. I like the shapes, the fact that they are easy to sharpen -- and the fact that they hold an edge for an incredibly long time. Like John Lucas, I recently turned some aluminum with them. I was making a a bunch of handles, similar to the Oneway handles, but much fatter. At times, the shavings got hot enough to make little burn marks on my arm. After finishing, I decided to see if I could turn wood with this much-abused tool. It was mildly dull, but I was able to kkurn A 12 inch Black Walnut bowl without tear out. A touch up with a hone, and the tool was sharp as a razor again.

Re: Thompson Skew

#6

Re: Thompson Skew

Donna Banfield

>Interesting that you point that out John. I spent the day demonstrating with other club members at an agricultural fair -- they're very big in New England in the fall.

I was turning Wizard Wands, using 2 crown skews (1/2" and 3/4"). I also had Doug's detail gouge with me. I had to resharpen and hone the two skews OFTEN. Doug's detail gouge only had to be touched up with my slip stone, and never touched a grinder.

And hearing that Doug may not be selling the skews (I hope that's just an ugly rumor), I think I need to order mine soon

Re: Thompson Skew

#7

Re: Thompson Skew

John K Jordan

>>And hearing that Doug may not be selling the skews

>(I hope that's just an ugly rumor), I think I

>need to order mine soon

I certainly can't speak for Doug, but when I was trying to decide which and how many skews to purchase, he told me that the batch he was making then (early September) was the last batch this year. Based on that, I decided to buy a spare or two. This is not something I can get at Sears. :)

JKJ

Re: Thompson Skew

#8

Re: Thompson Skew

Doug Thompson near Cleveland

>Thanks... Skews and scrapers will be made again but won't be done until late Dec. or Jan. They are so slow to machine it's almost painful to do... LoL

After SWAT there will be time to machine and guess what... Jimmy Clewes asked for a different tool made from what is available today.

Thinking about it the list of professionals is growing.

Mark Kauder - who started all this!

Molly Winton - who was one of the first customers... I'm talking way back when.

Jamie Donaldson

John Jordan

Johannes Michelsen

Al Stirt

Ernie Conover

Bill Grumbine

Graeme Priddle

Mark Sfirri

John Lucas

Wally Dickerman

Trent Bosch

Bill Neddow

Nick Cook

Michael Hosaluk

and more...

One day I hope to get David Ellsworth but that might take some time...

Thanks everyone...

Re: Thompson Skew

#9

Re: Thompson Skew

Donna Banfield

>Just placed an order for 2 skews Doug.

Hope you're not sold out of them ;^).

Re: Thompson Skew

#10

Re: Thompson Skew

Doug Thompson near Cleveland

>Donna, thank you. They were sent out today and hopefully you'll see them in three days.