Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

going to school on the skew

Posts

going to school on the skew

#1

going to school on the skew

Carol - now back in Dubuque, IA

>On Saturday I went to school to learn how to use a skew.

I have joined the Quad Cities Woodturners while I am in Iowa. Randy Nagel, one of the members, and an exceedingly patient man, offered a class on using the skew.

I order one of Doug Thompson's skews, but was unable to get a handle on it in time for the class. Randy, bless his heart, loaned me his Alan Lacer skew!

We learned how to rough turn a blank into a spindle, how to 'plane' cut, and how to roll beads on round and square stock. Think pommel cuts. The 'plane' cut leaves the surface as smooth as glass, but boy, was it ever elusive to find the sweet spot to do that!

Rolling cuts require a 'dance' of the body to control the cut. Lots of practice will be required. But I did manage to turn a few decent ones. The pommels came out nice.

Quad Cities Woodturners is an awesome club. Their members are very generous of their time and talents. The club owns 8 lathes and 5 members brought in their mini's for the class. We have a new meeting place with lots of space. 13 people could work all at one time. Randy mixed his instruction with lecture, drawings, and demonstration lasting about ten minutes, followed by 45 minutes of practice for each lesson. We enjoyed a chili lunch provided by one of the member's wife. All this for a donation of what you thought the day was worth. How do you put a dollar amount on priceless?

And next Saturday he is repeating it for another group. Wish I had the time to go again.

Yep. I'm a lucky dog!

Re: going to school on the skew

#2

Re: going to school on the skew

John K Jordan

>Congrats on joining the Skew Lovers Of the World club! (SLOW?) The skew is about my favorite tool but rolling beads with the heel still kills me. There is nothing better for smooth tapers and sharp detail. I'm still practicing the beads, following Darlow's DVD set on the skew and refusing to give up.

Until you said Quad Cities it didn't hit me where you lived now. I lived downriver in Clinton IA back in the early '70s when I was doing NDT work at the Quad Cities nuclear power plant a little further down and on the other side of the river. What flat country! My wife and I were out on our motorcycles one day and actually found a hill! We rode up and down, then up, then down...

And the bugs along the river in the summer could only be properly experienced on a motorcycle. A dozen strikes a second, with those the size of golf balls spaced every minute or so. Ride without a good face shield at your own peril. Good clean fun.

JKJ