Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

outboard screw center *LINK*

Posts

outboard screw center *LINK*

#1

outboard screw center *LINK*

john lucas

>I found this today in my HF catalog. I think it would make a decent handwheel or possibly outboard faceplate if you have a 1" left hand outboard thread. Of course it's not a bad price on a RH screw chuck either.


http://www.harborfreight.com/cpi/ctaf/displayitem.taf?function=Search

Re: outboard screw center *LINK*

#2

Re: outboard screw center Dead Link *LINK*

Juergen

>The dead link is for the search result. Go to the item link below


Screw Chuck Link

Re: outboard screw center *LINK*

#3

Re: outboard screw center Dead Link

Peter Hyde

>I advise you look closely at this item as the chuck itself might be a LH/RH thread but the actual screw is a RH so anything mounted outboard is gonna come undone.

I guess you get what you pay for. If you want a LH outboard screw centre then check with Oneway

Re: outboard screw center *LINK*

#4

Leo Van Der Loo

Re: outboard screw center Dead Link

Leo Van Der Loo

>Unless the lathe can turn counter clockwice and the outboard headstock is RH threaded.

Re: outboard screw center *LINK*

#5

Re: outboard screw center

Chuck Engstrom

>I'm holding an ordinary lag bolt up to the screen display of the ad and it appears to turn the same as the screw of the screw chuck. And if I'm not seeing things right here this early in the morning, it looks like some other screw could be fitted into this.

Chuck Engstrom