Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Clean shop

Posts

Clean shop

#1

Clean shop

john lucas

>I spent the whole day cleaning and organizing my shop. I have been working so hard in there for the last 4 months. I had pulled wood out from all the shelves and left them on the floor because I was always going back for more. I often had 3 projects going at once so there was a mess in 3 different parts of the shop.

couple all that with the purchase of 4 new tools that needed a location in the shop and I was constantly stepping on things or around stuff. Something had to be done.

I organized all the wood. I now have a spot for box blanks, long spindle blanks, short spindle blanks, hand mirror parts, bowl blanks and several boxes of cut offs that are used for all sorts or things. I have a drawer full of small exotic wood cutoffs that I use for any small project. I was going to make a space for micro goblet blanks but couldn't figure out where to put the pill box. :)

Now I have to tune up the new Radial arm saw and horizontal bandsaw that I purchased. Not to mention building the add on for the new compressor. It's going to be a busy month. I don't know where I'm going to find the time to produce the work I need for my gallery. They have a really big deal around Thanksgiving so I've go to make a dozen mirrors, some boxes, and work on the new gift ornaments.

My parents are also coming up for Thanksgiving so the house has to go through a thorough cleaning and all the little things that I've put off need to be done.

Re: Clean shop

#3

Steven Antonucci

I did a micro-cleanup

steve antonucci

>Like most shops, I have "stations" that each support some set of tools or functions. Sometimes, I find two things that have nothing to do with each other on the same station, just because there was space there when I acquired the item.

I've been doing micro-cleanups, which means that I focus a short effort on reorganizing one small area. Yesterday, I moved a bench, threw out all of the "spent sandpaper" that I had been keeping even though I know better, and hung some things on the wall that had been sitting on a shelf. In the end, I have one small area that probably benefited by 50% in storage and 100% in visual neatness.

I've done the big job one time. And one time was enough. Congrats on your "new' shop.

Steve

Re: Clean shop

#4

Re: Clean shop

Don wilcut

>I'm proud of you, John. Maybe now I will do the same.

Don

Re: Clean shop

#5

Re: Clean shop

John K Jordan

>>I don't know where I'm going to find the time

>to produce the work I need for my gallery

Maybe you could do like some of the other famous artists in the world - hire a row of flunkies to crank out mirrors and boxes under your direction and call them yours!

I like to clean out my shop area once a year whether it needs it or not.

JKJ

Re: Clean shop

#6

When you see a clean desk top.....

adrien

>be aware that the mess is in one of the drawers.

Re: Clean shop

#7

Re: A Clean shop

Darryl

>is sign of a sick mind!

Re: Clean shop

#8

guilty as charged :)

john lucas

>

Re: Clean shop

#9

New radial arm saw?

Mike Brazeau

>John - I assume you picked up a used radial arm saw. I got rid of mine on the Sears/Emmerson recall three years ago, and haven't missed it since. Replaced with a Dewalt SCMS positioned just to the left of my table saw and at the same height. I use it all the time for quick cutoffs etc. since the table saw is usually piled high with other stuff on the go. I did some tidying earlier in the summer, but still get lots of rude comments from SWMBO. She wants her car in the garage for the winter, which is my goal.

Re: Clean shop

#10

Re: New radial arm saw?

john lucas

>I have a Dewalt miter saw but it seems I'm always wanting to cut something just a hair larger than it will cut. This was such a good deal I decided to give it a try and see if it works out. If not I can probably sell it for more than I have in it.

Re: Clean shop

#11

Dick Hines

Re: Clean shop

Dick Hines

>If I went nuts and cleanded my shop I may never be able to go in there again. I have a kayak handing from the rafters and the ebst I can remember it's blue. Hard to tell with all the dust all over it.

One of these days I will find the time,when I retire in 2010, I am going to get the leaf blower and blow everything out in the driveway. Then pick up the good stuff and toss everything else.

Re: Clean shop

#12

Re: New radial arm saw?

Mike from Saint Clair Shores

>John,

You are probably already aware of this, but the radial arm saw needs a blade with a negative

rake on the teeth.

Mike

Re: Clean shop

#13

Re: Clean shop .. word of caution

Stuart Johnson

> I am going to get the leaf blower and blow everything out in the driveway.

Just a few words of caution.... move the pickup if:

1. There has been a heavy dew.

2. Your wife is going to drive it to a Friends of the Library meeting.

Re: Clean shop

#14

Are You Loosing Your Marbles?

Jorge Castaneda ~ Downeast Maine

>Nope, You are finding them.

I wish I did that a few months ago, mine is now total caos

Enjoy the order while it lasts!

Jorge

I thought the slide compound miter saws had put the radial arm saws to sleep...

Re: Clean shop

#15

Thanks for the info

john lucas

>I'm currently using the blade that came with it. I will upgrade to a decent blade when I get the time and money.

Re: Clean shop

#16

Re: Clean shop

Texian

>Poor John! He has a busy and productive life, friends and family who care about him, many turners who admire his work and customers who buy it, and four (4) new tools. You just gotta feel sorry for him. Especially that part about where to put the new tools.

Re: Clean shop

#17

JL

You are an inspiration to me. So I decided..

JL

>to try and find my lathe :). I knew it was in there somewhere. I also organized my wood somewhat.


img

Re: Clean shop

#18

sliding compound saws

john lucas

>Jorge I thought seriously about upgrading to a sliding compound saw but they are really expensive. I paid $125 for this radial arm saw. That's about half what my Dewalt miter saw cost so I thought it would be worth playing with. It will use my moulding head which I seldom use because it just doesn't work as well in a table saw. It's much better to run the saw through the work than to pass the work over the saw. At least for some cuts.

Re: Clean shop

#19

Love your lathe box, gotta do that

john lucas

>

Re: Clean shop

#20

Re: sliding compound saws

Jorge Castaneda ~ Downeast Maine

>Hi John,

Yes, there are things the radial arm saws can do that no other can, I am sorry I gave mine away, I made a contraption for it to hold a router, so I had a radial arm router, tilting the arm and cutting arcs was was great to make architectural stuff. Different cut from one same bit.

I love my Makita 1013, and can not be without it, but yes ,it costs a bit more than you paid for that saw.

Jorge

Re: Clean shop

#21

Re: Negative rake

bill Crommett

>John: I have a Craftsman 12 in. radial arm saw that I have had for many years and have used many different saw tooth configurations. Even with the most severe negative rake blade I could find the saw will tend to grab in a piece of 2 in. Pine or Oak. I found that it was impossible to rely on any of the detents for angle setting, so I have it locked at 90 degrees and it is used as strictly a cut-off saw. I use it a lot because it is at the beginning of my dust collector piping and as such it gives absolutely no sawdust kick back.