Just my 2 cents....and a little rant
Greg Haugen
>Michael,
If you want to go with 3X, I'd stay with the "K" grade and I've only seen 46 and 80. I've seen 100 and 120 in "I" grade but it's really soft and requires alot of dressing shortening it's life. If you've found a "k" wheel in something other than 80 and 46 please let us know.
Sharpening is really personal preference there is no right or wrong. If you have a club near you I'd recommend finding someone with those wheels and others and ask for a "turning night". Sharpen your tools on that wheels and cut with them. Like or not?? Also use the search funtion at the bottom and "search" the archives for grinding wheel posts. You'll come up with a lot of information.
I have to rant about something that is often over looked!! Dressing and "sharpening" pressure.
I currently have a 120 White AO wheel I use for sharpening. Some think it's too fine and that it burns tools. It doesn't when the sharpening is done properly. That's what I like, it's not the only way.
Another point to make about sharpening that is often over looked. Everyone gets caught up in the grit of a wheel or the color. But they forget how to sharpen!!! They're apply way too much pressure to the tool while grinding resulting in excessive heat and a shorter tool. Also "dressing" the wheel. Too much pressure and you can create, or screw up a wheel's surface, a "bounce". When the tool "kisses" the wheel it should bounce or vibrate. Grinding is a light touch, kissing the wheel. It should be looked at as "touching up the tool instead of GRINDING the tool. The best wheel you can buy, won't help if it's not properly dressed and a light touch is used to grind.
I was recently at a friend's house that has issues with grinding. "I" dressed his wheel and sharpened a tool. It was as smooth as a baby's butt!! The tool "kissed" the wheel, no bounce-just smooth. I apply no force down on the tool, I hold enough to keep it from falling. I'm talking about sharpening, not shaping here. He dresses it and grinds a tool, it's burned (which doesn't matter with HSS but it's not good practice) and it sounds like a bad rhythm from tribal drums or something. The wheels weren't not "high end" wheels. They are $20 white wheels from www.sharpeningsupplies.com. No "balancing" system or anything else. Properly dressed wheels with a light touch is the key. I have had a student push so hard trying to dress a wheel he tipped the grinder over!! Pressure and force is not your friend in gtrinding. No matter what the wheel is!!!
Turning is an artform, however "sharpening" is an artform also.
Just my 2 cents.
Greg H.