Continental spindle gouge-where to buy?
Bill Tindall, E.TN
>I want to buy a 30 mm Continental spindle gouge. The Sorby number is 829H. Does anyone in the US or Canada have these in stock? They seem readily available in England.
The source of the request is a class I just took with Allan Batty. I'll bet he said "in the trade we....." 100 times. Meaning that he worked in a factory making parts professionally for many years, starting as an apprentice in his early teens. These sort of teachers have a practical approach to woodworking that I favor- get the job done with no philosophical mumbo jumbo. Anyway, he provided a convincing demonstration of the superior design of this tool for a roughing gouge. It was easy to feel the better control of this circular radius tool as opposed to the typical U shaped gouge for spindle roughing.
He had some novel thoughts on bead turning tools and techniques too. The proof was in the practice. I never dared turn a bead with anything but a finger nail gouge. He had no use for this tool on spindles. With his tools and approach I rolled a bead (not very symmetric at first) catch-free on the first try and proceed to practice catch-free till they were more symmetric. For those that have struggled with a skew you can imagine my satisfaction, even with not quite symmetrical beads, some as small as 1/16".
If you turn furniture parts, try to get a class with this person. You will be rewarded from his 50 years experience. BTW, he said the standard "in the trade" was a Windsor chair leg in less than 2 minutes.



