Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Sharpening Information

Posts

Sharpening Information

#1

Sharpening Information

jwoodwright

>Can anyone email me the dimensions for the guides given in Vol 21, Issue 4 of the AAW Journal? I joined AAW too late to get this issue.

The guides allow you to set your Wolverine Jig exactly each time.

My tools and I thank you. John

Re: Sharpening Information

#2

Re: Sharpening Information

john lucas

>I can dig it up, copy it and send it to you if you'll send me your mailing address. What I do is easier. I set it where I want it and drill a hole through the adjustable arm and the body. Then all I have to do is put a drill bit in the two holes and lock it down and it's exactly where I had it when I first drilled the holes.

If you want more positions just lock it down where you want it and drill through the existing hole in the adjustable leg and create a new hole in the body. I used a 1/8" drill.

Re: Sharpening Information

#3

Re: Sharpening Information

jwoodwright

>Thank you John. I'll email my address. I really need help as I'm all over the place. The other idea will be great once I have the basic grind set. John

Re: Sharpening Information

#4

Re: Sharpening Information

john lucas

>I just looked up the article. We are talking about 2 different things. Later tonight I'll post of photo of my set up jig for setting the distance of the oneway jig to wheel. It's just as accurate and I think easier to make but it depends on the tools you have available. I'll also post a photo of the Wolverine jig with hole drilled for alignment. I'll still be glad to send the article. I'll check my e-mail when I get back tonight.

Re: Sharpening Information

#5

Don't be exclusive John, Post it!

adrien

>

Re: Sharpening Information

#6

Wolverine jig setting

john lucas

>After reading Mike Darlow's book I came up with my own version of setting the Oneway jig accurately and repeatably every time. Mike's system uses a 3 point contact to set the gauges. The grindstone gets smaller over the years and this system allow for that.

My system is quick and inexpensive. I simply take a triangle of 1/4" luan plywood and place it in the Oneway jig that has been set perfectly for my bowl gouge. The plywood should overlap the grindstone. I then draw a circle following the wheel. I mark 2 points on the plywood where I want the wood to touch the wheels. I draw an additional arc to cut out an area leaving the 2 points that touch the wheel. I leave the 2 points slightly long so I can turn on the grinder and flatten these points using the grindstone. This makes it perfect. I label this as my bowl gouge jig and this one is for a 55 degree point angle.

To use it I simply place the jig in the oneway V and push it up until the 2 points contact the wheel. Then lock it down.


img

Re: Sharpening Information

#7

Thompson detail gouge jig

john lucas

>Because I often switch back and forth between the bowl gouge and other tools I made a riser block that fits in the V of the oneway jig. Then I made another plywood jig to fit in this block. This allows me to use the same oneway V jig setting that I use for my bowl gouge to sharpen the Thompson detail gouge.


img

Re: Sharpening Information

#8

Jig for every tool

john lucas

>I made jigs for many of my tools. Some are different than the bowl gouge setting jig.


img

Re: Sharpening Information

#9

flat tool rest jig

john lucas

>I have also made jigs for the flat tool rest that comes with the oneway. These are for scrapers and the Stewart Batty grind and my skews. I have modified my Oneway tool rest with a slot to make sharpening skews easier.


img

Re: Sharpening Information

#10

How to share a file publicly without being exclusi *LINK*

Ken Grunke from SW Wisconsin

>Here's a tip for John and others who don't have their own web hosting and/or aren't computer geekwizzes to know this kind of stuff:

There are lots of free file hosting services for sharing PDFs, images, Word docs, presentations, spreadsheets, and just about anything else. They are very easy to use, probably easier than emailing an attachment and no harder than creating a post on WoodCentral.

Some of them are kind of obnoxious, forcing gaudy banner ads and various kinds of "smut" in your face. The most pleasant service I have found is fileqube. No signup needed, just go to their upload page, click the Browse button to find your file, and upload. As soon as your file is uploaded, you are given the link to publicly share the file.

The page where your file is downloaded from has just two Google ads plus some tagwords at the bottom in large fonts, but not at all objectional. Here's an example file I uploaded--woodturning related ;) and from that page you can go to the site's home page and try a file upload yourself if you want:


Inside/out Ornaments How-to

Re: Sharpening Information

#11

How to share - a problem

John K Jordan

>It would be nice some day to allow multiple photos in one message here.

One problem with hosting photos on a separate web site - if that site goes away for any reason the photos are lost from the messages. I've found several messages in the WoodCentral archives that were useless to me since the photos were gone. This is increasingly likely as more photo-hosting sites go under.

For this reason, some messageboard sites disallow hosting photos on a different server. For example, this note is on the Forestry Forum: Note from Forestry Forum Administration: The Forestry Forum no longer allows linking to photos on other web sites. That particular forum provides a photo gallery for each member and any of those photos can be placed in a message.

I'd personally prefer to see a string of messages each with one photo than try to make sense of a message with lost photos.

Another option is to combine several images into one using an editor - I use Photoshop. Example attached.

JKJ


img

Re: Sharpening Information

#12

Excellent example...

Ron McKinley

>I'll certainly use that one. Thanks....Ron

Re: Sharpening Information

#13

good points raised

Ken Grunke from SW Wisconsin

>I didn't think about the archives, an important consideration. But I wasn't thinking so much of photos and text, as of other types of documents.

I was just trying to address the situation where someone has a solution, in the form of a PDF or Word doc for example, and thinks the only way to share it is by email. If Woodcentral allowed attachment of such files, everything would be OK. Instead, you have to ask that person to include you in the mailing of said document.

Using one of the many file upload services is a risk for sure but there may be no other alternative. I suppose if someone would like to see a particular file a couple years down the road, they could contact the person to see if it was still available.

As for photos and text, I think the way John did it with a string of messages is the best way. Especially when a descriptive subject was used for each item as he did, instead of just "pic 1" and "pic 2" etc.