>I have made bottle stoppers using 3/8" dowels and I have made them with the dowel as an integral part of the bottle stopper. I find that making them as one piece is easier. Is there any reason to make them with the 3/8" dowel? Does the dowel make them stronger?
>No it doesn't make them stronger. I think the main reason for the dowel is often times "exotics" are used and people are buying them. If I buy a 12" stick of Cocobolo I want to get at least 6 maybe 8 depending on the size of the turning, I don't want to get only four because I'm turning down some cocobolo for the "tenon" of the cork. Dowels just allow to get the maximum use out of a bought piece of exotic.
>No a dowel is actually the weakest part of the stopper although they are tough enough that the owner of the stopper can't break it. I had trouble turning the wine stoppers with the dowel glued in, I broke several. I guess I'm too aggresive. I started using a 3/8" pin chuck that I made. This is quite a bit more rigid so I can be quite aggressive in the first stages of cuts and not worry about breaking the dowel.
>Sorry to hijack the thread, but the prior question prompted another one in my head. Which is considered "better" a genuine cork bottle stopper or a stainless steel one? I don't drink, so I've no practical experience. I do have some co-workers who enjoy a nice bottle of wine now and again, and I want to make stoppers as a holiday gift for them.
>I'm not a wine drinker either, but I have made a few stoppers. I really like the Ruth Niles stoppers. The folks I have given them too seem to like them too. I like them because they will be around forever and ever and are very durable and solid. I like that they give some weight to the stopper too. Anyway, that's my $0.02.
>Thanks, Barbara. I wondered about that. I knew I wouldn't want to use the same cap to seal successive bottles of milk, but for all I knew an "old cork" was just the thing for a bottle of wine. Stainless steel it'll be.
>I'm not a user either, but I have sold several hundred stoppers in the pasr 2 -3 years. I sell about 5 metal for each 1 cork. The metal ones with a corkscrew built in ( Penn State ) are big sellers at shows if you can get people to understand that there is a corkscrew in it.
Dowells for cork bases:
My turning time for a stopper is 5 - 6 minutes depending on the wood.
Turning a dowell would take more time for me. I also use a lot of glued up stock with segmented and etc designs, with grain going in all directions, this would not work for a turned dowell. I use a lag screw chuck to turn the stopper, then glue in the dowell. One thing I have learned is that people are suspicious of corks glued onto something, They keep asking if it will come apart. I think this must come from corks that are glued to rocks, glass, pottery etc and don't hold up. When I explain to customers that mine have a dowell that goes into the wood part 1 inch and is as strong as the wood, this usually lessens their fear of it comming apart.