Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Diamond hones

Posts

Diamond hones

#1

Diamond hones

John K Jordan

>Any recommendations for a source for these little diamond hones? I use the superfine (blue) constantly to touch up tool edges. (Touch one of these to a Doug Thompson gouge and the wood almost cuts itself.)

Woodcraft doesn't sell this type anymore and I don't like their replacement.

I found these on the web from around $5 to $6 each, a bit cheaper in a set. I'd like to buy about 10 each of the blue and the red. Anyone use these and have a preferred supplier?

JKJ


img

Re: Diamond hones

#2

Re: Diamond hones

Ray Binnicker

>John,

I see them listed at Rockler.com.

Ray Binnicker

Re: Diamond hones

#3

Re: Diamond hones

Brian Hahn in SW Wisconsin

>I love those hones. I stocked up when Woodcraft discontinued them. I just happened to stop at Woodcraft to get some of those hones on the day after they took them off the shelf. They still had them sitting in a basket and I really stocked up.

To answer your question, McMaster-Carr (www.mcmaster.com) carries them.

Re: Diamond hones

#4

Re: Diamond hones

Don in Ellensburg,WA,

>page 2631 in their online catalog

5.88 each for both blue and red unitgs

Re: Diamond hones

#5

Re: Diamond hones *LINK*

LARRY BISBEE

>Rockler Woodworking and Hardware have the 3 Piece Diamond Hone Sharpening Set in stock under Item #24663 for $15.99 plus shipping.


3 Piece Diamond Hone Sharpening Set

Re: Diamond hones

#6

Re: Diamond hones

john lucas

>John Those are the ones I prefer also. You can get them at Smoky Mountain Knifeworks. I buy them locally at a knife dealer here in town but whenever I'm out your way I have to hit the smokey mountain knifeworks.

Re: Diamond hones

#7

Re: Diamond hones

John K Jordan

>Thanks, everyone. I see Amazon has the sets as cheap as anyone but Smoky Mtn Knife is close.

The cheapest I've found today on the individual hones was $4.19 but it's hard to know who to trust. I started looking harder and found the EZE-Lap company itself seems to have a good price on individual paddles ($4.95 ea). I was hoping to buy just the fine and extrafine in quantities instead of buying a bunch of sets since I don't use the coarser hones. Maybe I'll call and see if they have discount quantity pricing.

JKJ

Re: Diamond hones

#8

Not all Diamond hones are equal

Ron in Drums PA

>You really get what you pay for.

The cheap hones that others have shown here break down quickly and even do a lousy job when new. Just not worth it. I put them in the junk category.

Alan Lacer sells a fantastic hone that really works. Go to his home page, click on tools then scroll down to the hones.

They are not cheap, but one will last you a life time.

The best one for turners are the 600 grit hones.

Re: Diamond hones

#9

Re: Diamond hones

Raymond Overman in SC

>John,

I got mine from Klingspor locally in Charlotte. I think they distribute for Rockler now so that's where they may be coming from.

Re: Diamond hones

#10

Re: Diamond hones

Don Orr

>Enco has them also.

Re: Diamond hones

#11

make your own-easy and cheap

Bill Tindall, E.TN

>For 300 years diamonds have been "cut" by embedding diamond powder in cast iron and grinding away. One can do the same to make a hone. Obtain a piece of gray cast iron the size and shape of a hone. I cut these from scrap cast iron. Embed with diamond paste available from any machine shop supply or lapidary shop ($15)and go to town. I use WD 40 lubricant, but olive oil is traditional. Only a tiny amount of paste is necessary to charge the stone, perhaps a mm long "worm" for a typical hone size.

The same approach is useful for chisels and plane irons, except a larger piece of cast iron is used.

Re: Diamond hones

#12

Follow up

John K Jordan

>As a follow up, I ordered a quantity direct from EZE-Lap. They offer a 25% discount if you qualify.

They said that as of an agreement about 2 weeks ago, WoodCraft will carry EZE-Lap products again.

JKJ