Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

A Super Glue Adventure

Posts

A Super Glue Adventure

#1

A Super Glue Adventure

Brian Hahn in SW Wisconsin

>Today I was doing an intermediate turning of a shallow 15" walnut bowl that has a narrow bark inclusion through the center. I had saturated the outside with super glue before cleaning up the recess for the chuck and turning the inside. The bark inclusion on the inside was bigger and it was somewhat loose. I put the bowl, still on the chuck, on the lathe bed so gravity would keep the glue in the bark inclusion. I gave the bark inclusion a good long squirt of super glue. The glue disappeared so I put on more super glue. And more glue...

Where is all that glue going???

The chuck was sitting in a pool of super glue on the lathe bed. The bowl was glued to two of the chuck jaws. The two chuck jaws were glued to the jaw slides. The two jaw slides were glued to the chuck body.

Fortunately, it only required minor applications of force to disassemble the chuck for cleaning -- once I found the parts diagram for the chuck.

Do you know where your super glue is flowing tonight?

Re: A Super Glue Adventure

#2

Re: A Super Glue Adventure

Ron McKinley

>You are either lucky or you caught it quickly enough! Good on 'ya! .....Ron

Re: A Super Glue Adventure

#3

Re: A Super Glue Adventure

jared

>I kind of had the same thing happen to me yesterday, except I was holding a partially done bowl in my lap. I kept putting more and more super glue in a knot hole that was of course on the bottem. It turns out the bowl was quite well glued to a fold of denim on top of my leg. I had to pull hard to get the bowl off of my pants. At least it was just the pants and not my skin that got glued. Jared

Re: A Super Glue Adventure

#4

Re: A Super Glue Adventure

Allen Neighbors

>Brian, that is one funny story. LOL, AML!! I've done some stupid things with super glue, and I know it ain't funny when it happens. But you sure did a good job of telling this story with humor! Thanks for the laughs!

Re: A Super Glue Adventure

#5

Dick Hines

Re: A Super Glue Adventure

Dick Hines

>I have glued almost anything you can think of to my self with CA glue. Just to name a few, model ship parts, fishing flys, my glasses,all sorts of turnings,and the dummest thing was the CA bottle. The glue ran down the side and I did not notice until it was to late. Took 1/2 bottle of releaser to get my fingers off the bottle.

Re: A Super Glue Adventure

#6

Re: A Super Glue Adventure

Bill Howatt

>If you want another laugh, imagine me with both hands glued to the bowl and trying to reach over the workbench to punch the intercomm button with my elbow to get my wife to come and get the solvent. Thank goodness it wasn't still in the chuck.

Bill

Re: A Super Glue Adventure

#7

Re: A Super Glue Adventure

Rich Egan

>I once glued my hand to a board, 18" long or so. It was seriously stuck. I began thinking about driving myself to ER, but realized that would be near impossible. Then again, sticking my glued assembly through the miter saw to make it smaller didn't seem too bright either. So after a half hour or so of soaking in solvent, I was able to get my freedom back. A little painful, but no skin lost.