Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Sphere Clamp ring....

Posts

Sphere Clamp ring....

#1

Sphere Clamp ring....

Randy G

>Hello,

So having seen a Soren Berger Demo recently at our wood turning club and reading an article in a recent copy of More Wood turning, I'm curious if there's a reason the clamp rings are made of metal? Or would something like a Piece of PVC work? It appears in the More Woodturning article that there is a sharp edge on the clamp to assist in the holding, but I'm not positive if that's the reason for metal over something else? Anyone have experience or opinion on this?

Re: Sphere Clamp ring....

#2

Re: Sphere Clamp ring....

Jerry Hall

>I have an early version of the metal ring. It in a sense creates a mini dovetail and shoulder by compressing the wood when the chuck is tightened. PVC wouldn't do this IMHO.

Re: Sphere Clamp ring....

#3

Re: Sphere Clamp ring....

Randy G

>So something like the edge or a hand scraper, bites into the wood just slightly?

Re: Sphere Clamp ring....

#4

Re: Sphere Clamp ring....

Colin

>I use a piece of split pvc tube to hold eggs that I turn. It needs a light cut but I don't see any reason why it wouldn't work for spheres. You won't have the grip of the metal ring BUT you won't have the mark that it leaves to remove either.

Re: Sphere Clamp ring....

#5

Re: Sphere Clamp ring....

Allen Neighbors

>I agree about the mark left by the metal clamp. I use a 'jam' chuck ala Anthony Harris. Works like a champ, and is much easier on the sphere.