Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Hands-On Tool Making Class

Posts

Hands-On Tool Making Class

#1

Hands-On Tool Making Class

Brian Hahn in SW Wisconsin

>Last weekend a dozen members of the Badger Woodturners descended upon the Robust Tools facility for a day of tool-making. We learned how to shape and temper steel and - best of all - we each got to make a Comfort tool rest of our own!

Here's a picture of the group with some of our products. I'm in the middle row, third from the left - the tall bald guy in a not-so white sweatshirt. Brent English is in the back row behind my right shoulder.

A second group of Badger Woodturners will invade Brent's shop this coming weekend.

This photo and the following photos are courtesy of Dave Hiller, the president of the Badger Woodturners and the only one who remembered to bring a camera.


img

Re: Hands-On Tool Making Class

#2

Shaping Tools

Brian Hahn in SW Wisconsin

>The group I was in spent the morning making simple hollowing tools. Slow speed grinders with white wheels are good for sharpening, but the wheels sure took a beating while we were aggressively grinding away steel.


img

Re: Hands-On Tool Making Class

#3

Is is hot enough?

Brian Hahn in SW Wisconsin

>The O1 steel is easy to harden and temper with a MAPP torch. Dennis has a magnet ready to check if the steel is hot enough to quench.


img

Re: Hands-On Tool Making Class

#4

Shaping the Comfort Toolrest

Brian Hahn in SW Wisconsin

>After lunch, my group made tool rests. Here I'm putting the curve across the length of the tool rest. Holding down the air valve was well within my skill level.


img

Re: Hands-On Tool Making Class

#5

Finishing the Tool Rests

Brian Hahn in SW Wisconsin

>I using a can of spray paint makes it easy.

Unfortunately the epoxy takes a day to cure so we had to leave the tool rests at Brent's shop. But he *promised* to bring them to the next meeting!


img

Re: Hands-On Tool Making Class

#6

Steven Antonucci

Ratty old sanding belts

steve antonucci

>I make a lot of tools, and I usually take the spent belts from my belt sander to grind steel. The flat platten in the middle is a pretty predictable surface, and when the belt is done, I toss it. Keep a container of water close by to cool the steel with either a BS or grinder.

Looks like a good time was had by all...

Steven

Re: Hands-On Tool Making Class

#7

Re: Hands-On Tool Making Class

Allen Neighbors

>Brian, thanks for posting these shots. I'd like to get into something like that around here. That's great!

Re: Hands-On Tool Making Class

#8

bending for toolrest

John K Jordan

>Can you give some specs on dimensions and thickness of the steel you used? Is that a 20 ton press? Is the top anvil bar a square crossection or round? Any closeup pictures of the result?

I've welded up toolrests from round cold rolled, but I want to make a different design.

Hey, who's that old guy in the picture? My mental image of you was about 35.

JKJ

Re: Hands-On Tool Making Class

#9

Re: bending for toolrest *LINK*

Brian Hahn in SW Wisconsin

>The steel is 1/4" hot rolled. I was making a low profile tool rest for my mini, so the steel was 1 1/2" wide and 6" long. The upper anvil was a flat about 1/4" wide. The standard comfort rests used a different set of anvils.

There are some good pictures of the finished tool rests on the Robust Tools site.


Robust Tool Rests

Re: Hands-On Tool Making Class

#10

Re: Hands-On Tool Making Class

Cyril Griesbach

>Brian, you've got a great group there and Brent and Dave are both among the best I've had the pleasure to know. I have a Robust Comfort tool rest and it's the nicest one I own.

Can you please explain the use of the magnet in the heating process?

Re: Hands-On Tool Making Class

#11

Re: Hands-On Tool Making Class

Michael Stafford

>Judging by the grins on everyone's face and the tools and such clutched in your fist a good time was had by all. Toolmaking is something I know very little about and would very much enjoy such a session.

Re: Hands-On Tool Making Class

#12

Re: Hands-On Tool Making Class *LINK*

Brian Hahn in SW Wisconsin

>Cyril,

When the steel is heated to the critical temperature for hardening, it becomes non-magnetic. So when the magnet doesn't stick to the steel, it is hot enough to quench.

There's a nice article in the WoodCentral articles section about heat treating steel that describes this process (and a lot more).


A Woodworker's Guide to Tool Steel and Heat Treat