Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

American Elm *LINK*

Posts

American Elm *LINK*

#1

American Elm *LINK*

Sean Troy

>A local state Park (John James Audubon)here in Henderson KY. lost a larg century old American Elm tree to the stom that blew through here this week and I am going to be turning some of it for their Museum and some for a fund raiser for them. I have never turned elm and was wondering how it turns, anything I need to look out for. Can I turn a hollow form green to finish ok? thanks for any help, Sean


http://parks.ky.gov/findparks/recparks/au/

Re: American Elm *LINK*

#2

Re: American Elm *LINK*

greg_haugen

>Sean,

I'd say it's close to "ash" in its turning quality. End grain is relatively abrasive, a sharp tool will cut it nicely though. I sand my bowls by alternating between forward and reverse every other grit. That helped this wood since it's so fiberous. It's not as dense as Chinese Elm. It's also pretty stable. I had a "trunk" that I cored up into bowls and I don't recall losing one of them to cracking. The "featured piece" at the bottom of my homepage on my site is one of the bowls. It looks "lighter" than what it is due to light reflection on the finish, Tried and True Danish Oil. The bowl is also "quartersawn" since the tree was so much larger than my lathe, the widest "slabs" I cut in half and still had to cut them down. The one side of the bowl that looks "light" is where the grain wrapped around the bowl, from where it was cut in half-the "sapwood" is opposite of this area, created a real nice "chatoyance" effect that's very reflective.

Hope that helps.

Greg H


Greg Haugen Woodturning

Re: American Elm *LINK*

#3

Re: American Elm

Sean Troy

>Thanks for the info Greg. Nice work on your site, looking good.

Re: American Elm *LINK*

#4

Jesper, Denmark

Re: American Elm

Jesper, Denmark

>It is verey tenaceous (sp?) so you will have some tear-out on the end grain. In my opinion, it is similar to Balck Locust to turn - except the locust smells good and the elm like horseapples.

Re: American Elm *LINK*

#5

Re: American Elm

John K Jordan

>Sean,

I got some elm last year from a neighbor and some of it was spectacular. I'll try to take a photo of a piece or two. Most elm I've seen is kind of bland but this had some killer dark figure all the way up the middle of the tree. The tree was maybe 24+" in diameter but the figure was only 8-10" across if I remember correctly. If you have a choice, perhaps you can pick some that is more interesting than other.

The american elm I turned was coarse but turned nicely with sharp tools with no tearout. I roughed, waxed, dried, then finish-turned and had no cracking or checking.

JKJ

Re: American Elm *LINK*

#6

Oh yeah! LOL!!

greg_haugen

>One very unique part of turning Elm. The smell! Definately the fragrance of horse and cow manure will be in the air. LOL!!

Greg

Re: American Elm *LINK*

#7

Ric Taylor

Re: Oh yeah! LOL!!

Ric Taylor

>Greg,

I think that depends on the environment the tree grew in. None of the elm that I have turned has had any unusual odor.

Ric