Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Thanks John Lucas!

Posts

Thanks John Lucas!

#1

Thanks John Lucas!

Michael Stafford

>I came home for lunch and found a package in the mailbox from John Lucas. I opened it and to my surprise there was a wonderful hand made depth gauge from John, the one where he uses carbon rods as the measuring stick.

What a wonderfully useful gift. Maybe I won't turn through the bottom of as many boxes now.

John, I appreciate that you took the time to make, package and send this wonderful useful tool to me. It is an act of generosity I will not forget.

Thank you very much!

Re: Thanks John Lucas!

#2

your welcome Mike. Pass it forward

john lucas

>

Re: Thanks John Lucas!

#3

Picture, Mike!

Carole Valentine

>

Re: Thanks John Lucas!

#4

Ditto!!

greg_haugen

>

Re: Thanks John Lucas!

#5

I'll work on a picture.

Michael Stafford

>

Re: Thanks John Lucas!

#6

here you go

john lucas

>This is a slightly larger version of the one I made Mike. They are easy to make. I bandsaw a cut in from the side. Then drill a hole every so slightly larger than the rod through the bandsaw slit. I put a small clamp on the piece to keep the wood from flexing while I drill the hole. Then I use a carriage bolt with a wing nut to lock the rod in place. If you don't go to the trouble of routing the edge and use a straight piece of wood you could build one of these in 5 minutes.

Re: Thanks John Lucas!

#7

I hate when I do that. :)

john lucas

>By the way Mike. This is 100 year old Chestnut.


img

Re: Thanks John Lucas!

#8

Thank you John, I was wondering...

Michael Stafford

>what kind of wood it was. My first thought was some kind of oak but antique chestnut makes it better.

Thanks again.