Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Pricing

Posts

Pricing

#1

Pricing

JCanning

>Hey, I've been turning for about 6 years now and never tryed to sell any of my turnings. I have given some away as gifts and the rest are in the house. Needless to say the wife wants to get rid of them, she says to give them away. I would like to try and sell them, but I've got now idea how to price them. Any help would be appreciated.

Re: Pricing

#3

JL

Re: Pricing

JL

>What sort of work did you put into them? How good is the form, finish, etc.?? Do you have any galleries in your area where you can see comparable works (and how much they go for)? What sort of pieces are there?

I have a couple of galleries in my area and numerous studios. The galleries hold a variety of pieces from $50 to $5000. Ditto for the people's studios. We also have a number of craft shows in the area.

I've heard of pricing by the inch ($5-$20 /inch) so a 5" bowl that was 3" high would be $40 to $160. There are no generalities however. Each piece should be judged separately. The best way to price your work is to look at comparable work and price it accordingly.

I do furniture - so I base my price on shop time and material costs. But I'm not selling "art", so to speak.

My $0.02.

Re: Pricing

#4

Re: Pricing

Bruce Forrest

>I think that most people starting out selling tend to under-price their work. Make an estimate of the price you think that you should charge and then double it. If your work still seems to sell quickly, consider doubling it again. You'll know if it's priced too high for your area if you don't sell anything.

Re: Pricing

#5

Richard Allen

Re: Pricing

Richard Allen

>Pricing?

Selling your work is just as much of an effort as making the pieces you wish to sell. If your goal is to reduce inventory AND to make some money then you will have your best chance of selling your work if you work hard at finding all you can about marketing your woodturnings.

The keys to selling your work is to be critical of your work. Don't even try to sell work which has flaws. Flaws are tool marks, tearout, sanding scratches, imperfections in the finish, bad form.

You shouldn't try to sell "stuff" that is less than perfect. You will likely fail at selling them and you will damage your name as a woodturner.

Some of us, me included, find it difficult to be critical about your own work. Find a fellow woodturner to examine your work and tell you anything that is wrong with your individual turnings.

Take advantage of opportunities to get rid of your turnings. Someones birthday? Gift. Someone have something special going on in their life, wedding, graduation, child birth, get a new job, lose a job, go on vacation, return from vacation. If someone sees something you have made and makes a comment about that object then give them that object.

Good luck with your quest

Re: Pricing

#6

Re: Pricing

Texian

>JC,

Good advice from Richard Allen. Beyond that a couple of starting points: Bowls $10 per inch of diameter, and in many venues it has to be more like $3 to $5 per inch to sell. Another way (diameter x height x skill factor) + material cost. Skill factor is something in the range of 1 to 3. Could be more of the piece is very good, very well finished, or you are famous. Then with those numbers in mind, eyeball the piece and ask self and others (if available) if your price will seem to be an acceptable value to potential buyers. For segmented work one figure I have seen is $2.50 per segment for a starting point, but sometimes seems way low and other times is way too high. Hope this helps. Remember, in the marketplace a piece is only worth what someone is willing to pay for it. Hope this is helpful.

Re: Pricing

#7

J, check your email

Allen Neighbors

>

Re: Pricing

#8

Dick Hines

Re: Pricing

Dick Hines

>I find this the worse part of my turning. On wood that I buy, like Australian burl and other woods I can figure them close. But on the wood people just drop off at my house that's another thing all together. I try to price my works as if I was going to but them. If I think the price is fair and would pay the price for it I think it's a fair price.

Like I said it's the worse part of turning for me.