Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Lathe accessory question

Posts

Lathe accessory question

#1

Lathe accessory question

Mike Cunningham

>Does anyone have experience with the Sorby Precision Boring kit and/or the Oneway Drill Wizard. I'm debating between the two and would appreciate hearing comments from anyone with experience with either system.

Thanks

Re: Lathe accessory question

#2

Re: Lathe accessory question

john lucas

>Mike I don't have either. I do it with homemade jigs made by simply turning square piece of maple or other hard wood, down to fit my banjo. Then I drill a hole in the square end to accept whatever drill size I need. I clamp this in the banjo and align it with the piece and then drill. They work great and last an amazingly long time.

Re: Lathe accessory question

#3

Richard Allen

Re: Lathe accessory question

Richard Allen

>I have both devices. The both work fine. I prefer the "Drill Wizard".

You can use anything that fits in a drill chuck with the "Drill Wizard". The Sorby tool Has bushings for specific drill bits.

The "Drill Wizard" works with a variety of different tools, corded electric drill, some die grinders, Fien multi-tool with adapter.

The tool is easy to setup and easy to use.

The Sorby tool is much quicker to setup and if the holes you want are one of those offered with the Sorby system it is very effective.

Re: Lathe accessory question

#4

Re: Lathe accessory question

Douglas

>I have the One way Drill Wizard. It works and works well.

Re: Lathe accessory question

#5

Thanks guys

Mike Cunningham

>Thanks very much for the info

Mike