Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Stereo photography and turnings *LINK*

Posts

Stereo photography and turnings *LINK*

#1

Stereo photography and turnings *LINK*

Ken Grunke from SW WI

>I have recently discovered the joys of stereo pictures, after coming across an old stereoscope and a few image pairs from the early 1900's.

I wanted to try my hand at stereo photography, so I rigged up a sliding camera mount for my Canon Powershot, held on a tripod, and went around the neighborhood taking a few test shots. I printed out some of the best shots for viewing in my old stereoscope. Pretty cool, but I want to show some pictures around, like, on the internet. I knew about the red/blue glasses, but how many folks have a pair of those?

Then I discovered that stereo pairs can be viewed WITH THE NAKED EYE on a computer monitor by reversing the pair of images left-to-right and looking at them cross-eyed. It felt weird at first, but after some practice it became natural.

You kind of have to force your eyes into the cross-eyed position, which feels a bit uncomfortable, until you see what looks like 3 images. Concentrate on the middle image, ignoring the ones on either side, then relax your eyes. Once your eyes are relaxed, you can move them around in the center image to look at any part of that image, which has 3-dimensional depth as you would expect.

I wondered about shooting my woodturnings in 3D. I deduced that the amount of camera shift should be smaller the closer you get to the subject. For a landscape, the distance between images should be around 2 1/2", close to the spacing of the human eyes.

This image pair of one of my inside/out ornaments was about half that, 1 1/4", at a distance of about 4 feet. I kept a distance from the subject to keep everything in focus, and cropped it. I purposely added some "clutter" in the shot to give interest for the 3D effect.

Below is a link to one site with a better explanation of how to view crossed pair stereo images than I can give.

I figured some folks might want to try this, it can be fun as long as your eyes can handle it. If anyone wants more details on my camera shifting rig, let me know.


img

How to View 3D Photos

Re: Stereo photography and turnings *LINK*

#2

A couple pointers for viewing...

Ken Grunke from SW WI

>The best distance for me from the monitor is about 32 inches, or about a hand's length longer than my arm. Look at the image square on, with your focus at the center dividing line. Cross your eyes until it looks like you see 3 images, then relax your eye muscles and you should be able to view the 3D effect without any eye strain. The link I gave had a few other tips as well.

Re: Stereo photography and turnings *LINK*

#3

Re: A couple pointers for viewing...

bill Crommett

>Ken : Were you not told as a child that if you looked cross-eyed too long your eyes would get stuck that way ? I have had monocular vision for most of my life, but I can remember those old Sterioptican pictures and how they looked. Funny thing, though, I can't remember how real life things looked like in stereo.

Re: Stereo photography and turnings *LINK*

#4

Re: A couple pointers for viewing...

Ken Grunke from SW WI

>Hi Bill, yes, I did hear that warning as a kid. Could be true, or not--maybe for some people it is. I came across several websites referring to crossed stereo views without a mention of bad things happening to your eyes, however.

Sorry about your lack of depth perception. I guess I don't realize what a gift it actually is to have two eyes, so I take it for granted.

Until I have a bit too much to drink, and start seeing double, that is ;) Been a while since that has happened...

Re: Stereo photography and turnings *LINK*

#5

excellent

John K Jordan

>Ken,

That's beautiful! From years of working in the 3D graphics field (I started in highschool drawing stereo pairs by hand!) I've made and viewed a lot of these (usually 3D renderings). I haven't looked at one for a while but I found I can still bring them into convergence almost instantly with no effort and no strain. It's easy once you get the hang of it, but until then it might drive you nuts! I found the best viewing distance for my eyes was about 35", my normal monitor distance.

I think it's a little easier to view if surrounded by a solid color instead of the woodcentral page backgound - try loading the pair into Photoshop, increasing the size of the canvas to match your monitor using perhaps a black background, then save this for viewing. Or use an image viewer like ACDSee which can automatically display the image with a black background.

And an eye doctor once told me don't worry about straining your eyes. The exercise is actually good for your eyes and similar exercises are sometimes prescribed for certain conditions (i.e. problems coupling distance with focus).

Please do post details of your photo setup - maybe more people will make and post these!

BTW, your composition, lighting, and choice of colors is wonderful (although the stem coming in from the upper right does add a little visual discontinuity to the stereo viewing due to the incidental alignment with the stem on the left).

JKJ

Re: Stereo photography and turnings *LINK*

#6

Re: A couple pointers for viewing...

john lucas

>Ken I finally got to where I could see it. I still see 3 images but the middle one is 3D. I always have trouble with this stuff since I started wearing glasses. Cool Technique

I have a STereo realist camera. The advance doesn't work properly and I've never taken the time to fix it. It's in my camera collection now.

Re: Stereo photography and turnings *LINK*

#7

there is a way

John K Jordan

>>...I still see 3 images but the middle one is 3D.

John,

You will always see three images with this technique but the outer ones are soon easy to ignore.

There is a way to see just the central image with a little trick I came up with: after bringing the images into convergence so you can see the stereo composite, try holding both hands up to either side of the images but fairly close to your face. While concentrating on the stereo image, slowly bring each hand towards the middle, either both at the same time or one at a time. The two outer images will disappear and you will see is the inside stereo image only. The left hand will block the left image from the left eye, etc. Since with the crossed-eyes stereo pair configuration the left image is viewed by the right eye, the hand does not interfere with the stereo process.

This works better in a darkened room where there is not a lot of light on your hands. Another way is to use two black pieces of paper. It's best to hold the blocking objects fairly close to your face so they will be out of focus and will not compete for attention in the brain.

JKJ

Re: Stereo photography and turnings *LINK*

#8

Re: excellent

Ken Grunke from SW WI

>Thanks John, I mangaged to get a shot of my cobbled-up camera "shifter" before my camera battery pooped out.

This was an instrument slide I purchased at the University Swap Shop in Madison, WI, which sells surplus goods from the college. Its quite heavy and cumbersome but really quick to put together using scrap metal and such. Something could be fabricated from hardwood or aluminum, fairly easily--I may do that so I can put that heavy chunk of steel back on the shelf.

Thanks for your comments and advice. BTW, I can't imagine DRAWING a pair of stereo images and having them actually work. I've been meaning to fire up my 3D CAD program and try a stereo pair but haven't gotten a round tuit yet.


img

Re: Stereo photography and turnings *LINK*

#9

Re: A couple pointers for viewing...

Ken Grunke from SW WI

>John, it took me a few minutes the first time I tried. I still have trouble sometimes, especially when I'm tired. Seemss like I can try too hard sometimes, if I just relax and let it happen that seems to work better.

My dad had a 5 x 7 antique stereo camera a few years ago when he was an active portrait photographer. I played around with it once by using b & w printing paper in place of film but I didn't have a good way to view the images. Wish I knew about the crossed-eye technique back then.

Re: Stereo photography and turnings *LINK*

#10

Re: Stereo photography and turnings

matt overton

>That is spectacular. Thanks

Re: Stereo photography and turnings *LINK*

#11

Re: excellent

Bob Macgregor

>If you have a cross-slide vice on your drill press, it would probably work really well, too. Of course, it would also be even heavier!

BOB

Re: Stereo photography and turnings *LINK*

#12

drawing stereo pairs

John K Jordan

>>BTW, I can't imagine DRAWING a pair of stereo images and having them actually work.

I got the idea after seeing some stereo pairs in a magazine or book somewhere.

I started by drawing three views of my object near the top of a fairly large piece of paper. Then at the desired viewing distance I marked sets of viewing points the desired interocular distance apart. With a straight edge I drew lines from each viewing point through the major features of the object in the top and side views and projected onto a line representing a plane. It's been a long time, but I think from there it was just a matter of mental juggling to envision the projections from the front and sketch the two images. It was actually easier than I thought it would be, especially after I practiced with a few simple geometric shapes in wireframe. I did some shaded objects before I got bored and went on to something else. I've still got some around here somewhere.

It sure is a lot easier to do it with the computer! I've used 3D Studio Max since it was created and setting virtual cameras is a snap. It's even easy to do animations such as flying the stereo camera or rotating the object. You have to combine the frames into a stereo pair AVI or whatnot, then view them on the screen with the crossed-eyes technique.

I remember seeing an article on this in an early computer magazine sometime in the mid 70's, Dr Dobbs, perhaps. The author generated stereo pairs of 3D lissajous patterns. For a time generating and viewing stereo pairs of mathematical functions was all the rage in the geek world. :)

JKJ