Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

large bowl coring *LINK*

Posts

large bowl coring *LINK*

#1

large bowl coring *LINK*

John K Jordan

>I was looking at Lissi Oland's web site when I saw how she saves the wood inside a large bowl. She cores with a chainsaw! Yikes. The caption on the picture below indicates the core removed from this piece will make at least a 28" bowl.

If you want to see photos the entire process of preparing and turning a large blank, browse under Large Turnings in the link below.

I had the pleasure of several visits with Lissi when I was in Brasstown at JCCampbell a few weeks ago. She is a dear friend of an old friend of mine. While chatting, we discovered she also was a good friend of my sister and her future husband at Berea College back in the '60s! Small world/six degrees.

The finished turning she had on the lathe when I was there was 33" in diameter. She fastens large blanks like this to a face plate with Gorilla glue and lag screws. (Shameless advertisement: for those who might be interested in trying large bowls she has tool sets available, proven by years of big turnings. I haven't tried them, but I bought a set for the future and they appear to be well made.)

JKJ


img

http://www.olandcraft.com

Re: large bowl coring *LINK*

#2

A sight to behold

mfoster

>I don't know how old Lissi is, but I'm under the assumption that she is no spring chicken. I would love to see her coring a bowl like this. I would try that if my lathe (an older woodfast with riser blocks) had a big enough swing, as it is, I can use a Kelton corer to handle anything that is possible on my lathe. It does bog down some with larger, deeper coring. Considering upgrading sometime soon but not really sure to what. Stubby has always attracted me.

Re: large bowl coring *LINK*

#3

Re: Knud was my first turning.......

Jamie Donaldson

>... teacher in 1986, and little did I appreciate where those beginnings would lead me. We met at a show, and he was the first turner that I saw use "imperfect" wood, not kiln dried and glued together to make larger items, and that alone set me free to explore the wealth of wood Ma Nature provides "as is!" Lissi was then the drill sergeant in charge of sanding, and I am known today for the quality of my finished surfaces. The angled hollowing tool that I purchased that first week is still one of my favored tools, and although there is a learning curve, it is extremely effective for its intended purpose. Lissi is quite a worker, and I try to visit to wish her the best every chance I can while at the Folk School.

Re: large bowl coring *LINK*

#4

Re: Hey Mike, my "Studly" is a star!!

Jamie Donaldson

>

Re: large bowl coring *LINK*

#5

Woodturning Masterclass features similar coring *LINK*

Craig Daymon

>I have the book, "Woodturning Masterclass", which features a turner (whose name I forget) who turns VERY THIN bowls of a similar size or larger (maybe greater than 30 inches). He uses the same technique for coring, mostly to save him a LOT of time getting the bowls that thin. He also uses specially ground tools, which are described in the book.

It's a very good book and still on sale through Lightning for half price ($8.95). I bought it at that price over 6 months ago. Lots of good, mostly british, turners in the book.

-Craig


Lightning Publications Woodturning books

Re: large bowl coring *LINK*

#6

Re: Woodturning Masterclass features similar corin

John K Jordan

>Yikes, another book to buy! (I think every time someone recommends a book here I buy it and three more.) Thanks.

JKJ