Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

gift ornament

Posts

gift ornament

#1

gift ornament

john lucas

>This is a new concept I'm trying out. I've been hanging around Ed and Mike too much so it's kind of natural to combine boxes and ornaments. I call them gift ornaments because you can screw them apart and hide gifts inside. They are kind of time consuming to make out of wood with nice figure because you have to remove tiny amounts of wood from the joining lip until it screws down far enough for the grain to match.

This one is Cocobolo and is about 6" tall. It's a little heavy because you have to turn the inside first on this style ornament. I was playing with the outside shape and didn't want to blow it. On the next one I'll draw out the shape first so I can have a better idea on how thin to make the inside.


img

Re: gift ornament

#2

ornament open

john lucas

>I used the Baxter threader with 16 tpi head for this ornament.


img

Re: gift ornament

#3

Re: ornament open

davidwalser

>John,

Great idea! Another very valid excuse for me to buy a threader...

Re: gift ornament

#4

Re: ornament open

Mike Brazeau

>Beautiful work John. Could not even see the joint. Your mind never stops it seems!

Re: gift ornament

#5

Re: ornament open

Barry Elder

>An excellent idea and georgeous work. Kudos!

Re: gift ornament

#6

Steven Antonucci

Uncanny... were we separated at birth?

steve antonucci

>Just the other day, I decided to turn a box. While standing at the lathe, I decided to turn two elements on either side. When I showed it to my wife, she decided it was a gift ornament and should go on the Christmas tree for me to put earrings in.

If I can find my camera, I'll post a picture later.

Steve

P.S. Ditto all of the comments on the grain match. I'm trying to figure out how to make a thread chaser out of a nut and bolt...

Re: gift ornament

#7

Re: Uncanny... were we separated at birth?

john lucas

>Steve do a search on thread chasing. Somewhere I found an article on making thread chasers. It's not that hard. The reason I don't do thread chasing right now is the availability and expense of woods that are tough enough to chase threads. I have been saving some Osage Orange and it's probably dry enough now to make boxes.

I am currently looking at alternatives to turned or chased threads. My initial thoughts were PVC connectors. Cheap but not that great looking. There are probably some kind of metal connectors that can be scavenged from some source to do this. Of course eventually I will develop the skill to do this on the metal lathe but then the time might become a big problem.

Re: gift ornament

#8

Re: Uncanny... were we separated at birth?

Cyril Griesbach

>Outstanding work, John, and an outstanding idea as well.

Re: gift ornament

#9

Steven Antonucci

Michael Mocho had an interesting idea

steve antonucci

>He uses peg to make the wood cut much easier. He soaked the area (about 2 drops) on the male and female thread, and the wood cut much more cleanly- we were using dry maple. By the time he finished the thread, he had completely cut away the PEG soaked wood, leaving nothing but a clean thread.

Steve

Re: gift ornament

#10

Threaded gold rings

Mike Jones, Redding, CA

>Threaded gold rings from Lee Valley. They have two sizes, and this might give you a short cut.


img

Re: gift ornament

#11

Re: Threaded gold rings

john lucas

>Thanks, I knew I had seen them somewhere.

Re: gift ornament

#12

Threaded rings

John K Jordan

>Now there's a cottage industry for someone with a threading machine, although the market may be pretty slim! - create and sell sets of threaded wooded rings in a variety of sizes from ebony, boxwood, dogwood, pink ivory, cocobolo, etc.

JKJ

Re: gift ornament

#13

LOL

Barbara Gill, Remlik VA

>I was thinking about doing the same thing Monday while making an ornament. See, that is why "there are no new ideas.

Re: gift ornament

#14

Link for Thread chaser from bolt *LINK*

Mike Brazeau

>Steve - here is a good article at the Greater Vancouver Guild site . I was always going to make one and finally bought a set of 16 pitch which sit in the unused tool drawer. Found another reference using segments of a die which was brazed or silver soldered to a holder.


Thread Chaser from a Bolt

Re: gift ornament

#15

Steven Antonucci

That's Awesome! Thanks!

steve antonucci

>I will add it to the list...(of things I need to do, of course...)

Steve

Re: gift ornament

#16

Re: Alternative to wood inserts

Karl Rinehart

>Corian will hand chase quite easily with a little practice using Sorby hand chasers. You can probably find scraps in black, white or whatever. These inserts are easy to insert and fairly strong.

Re: gift ornament

#17

Re: Alternative to wood inserts

john lucas

>Karl Great idea. Thanks a bunch. I've been wanting to learn hand chasing anyway and this sounds like a good material to practice with.