Re: Robust lathe vs. Serious lathe
Fog Tanner
>Roger,
I went through that a number of years ago. I had/have a 16" steel bed Delta (US made), which did everything I wanted - until I got into offcenter turning. I quickly hit the limits on that as far as swing and weight. I started looking at other lathes, including the Serious at the time. Brent hadn't started Robust at that time. I finally settled on a choice between Vicmarc and Oneway. After conversations with a number of professional turners I went with the Vicmarc 300. I also got to "kick the tires" at a symposium here in Texas. That really sealed the deal.
After reading a page on lathes that Raffan had written, I went with the 300 longbed. Richard said that most people don't need anything over a 16" swing. But the 24" 300 long bed weighs 1000 pounds, and the bed is long enough to move the tailstock out of the way and still be on the lathe. It is a scientific known fact that the weight of the tailstock increases with age. I use it quite a bit for some of the offset bowls (insurance) so it is nice to be able to just push it "down to the end" when not needed.
At the time I looked at the Serious, they were made by a different owner and had aluminum headstocks. I wasn't sure that the aluminum would stand up so passed on that one. The "new" Serious looks to be a decent lathe at 1500+ pounds. All cast iron and plenty of mass. The only thing I don't like about it is the splayed base. Those are difficult for me to work around. I have the Australian Vic, which has the most comfortable base I have ever used - at least for me.
After seeing pictures of the new Robust Sweet 16, the decision on lathes just got a little more difficult (I have the urge for a bigger lathe too). It has a fixed head, which is a must for me with the offset turning, and you can configure it to go up to 30". I look forward to seeing one next month here in Texas.
Either way you go, your turning will improvde just by going to the larger machine. After getting mine, I found out why all the video/DVDs that the pros make are on large lathes. They are really that much more solid and easier to work on. I have also come to the realization that one can never have too many lathes. Good luck in your quest, I know it is agonizing - but worth it in the end.
Fog