hello - I'm new *LINK*
Ben
>Hello everyone! My name is Ben, I live in Greenville, South Carolina, and I do video production for a living (mostly graphics & editing, video compression, DVD authoring, etc, but also some lighting/shooting). I'm brand new to this site and to woodturning. I have no equipment, tools, wood, books or anything... and hopefully no bad habits yet! :)
I've seen some amazing things made, and the things that interest me the most are smaller & unique items.
Well, I've wanted to try turning for a while, and this past weekend had a great opportunity to be taught the basics from an amazing teacher. I had a blast with it! I think I'm hooked!!
Over just a few hours I was able to successfully (well, you be the judge) make two tops and a 12" wand. I started with learning the basics (note: I still can't name the hand tools!) I learned about the lathe, the tool rest, some of the tools, and the importance of sharpness, angles, sanding & lots of light!
After practicing a bit, the first thing I tried was a small toy top made from pine. I'm not sure if I like pine... but the top works; spins very nicely. I didn't try to sand or polish-- just focused on the basics; tried not to mess up.
Next I cut a 'real' top from dogwood, with all the completing touches of sanding, friction polishing and even topped it off with a museum wax of sorts to keep fingerprints from showing (is that correct?) It's larger than the pine one, and I tried to keep the curves smooth and an overall symmetrical design. I learned how to 'burn' dark lines with wire (neat!) and incorporated that on each side. It has a neat worm hole or something in it, and great color. I like dogwood very much!
Finally I moved to a magic (?) wand! This was much more challenging. The wood is cedar, and I think this wood is two easy. (yes, two) -- easy to sand/shape, easy to scratch/mess up! :) Near the end I was a bit hurried to get this done, but if I had more time, I would have tried to put some more detail into it & perfect the shape more. I think it came out nice though. Certainly the finish is nice.
Below is a link to some pictures I took of the 3 pieces -- I was told by my excellent teacher (can you guess who it is?) that the pieces looked good. But in my mind I made a lot of mistakes (esp on the wand) during the turning, and I guess that is bothering me a tiny bit. No worries though, this is my FIRST time turning and I had a lot of fun. I may have the opportunity to borrow a mini Jet lathe to try some more-- can't wait!
So basically I know nothing about wood types, tools, finishes, etc. and I would like to learn more. I'm hoping you guys can give me some 'beginners insight' on where to go next -- good books, etc. Thanks for your time, sorry I know its a long-ish post, but this is all new and exciting to me. I'm sure you understand. :)




