Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Good news

Posts

Good news

#1

Lyle Jamieson

Good news

Lyle Jamieson

>I want to pass along some good news. I am on a quest to get a mini lathe so Ive been digging deep to insure I get the right lathe to fit my needs. I am fortunate so that price was not the issue, I wanted the best lathe for my circumstance.

I am really impressed with WMH Tool group. Many of you may have never heard of them but they are the new owners of Powermatic, Jet and other brands of tools of all kinds. In my search for information I went to many of the manufacturers direct as well as speaking the the distributors that sell them. I spoke to many levels of personnel at WMH both in their headquarters and regional offices. At every level from the receptionest on up the corperate ladder, they gave me direct answers with no run around and immediate help to talk to the people that could help answer the questions I had. So often you get stuck in the voice mail loop and cant find your way out, let alone to speak to a real person. None of that with WMH. And the thing that impressed me most is they listened, really listened and cared about making their lathes respond to what the turning world needs. I know Nick Cook and others have been consulting with them to improve the Powermatics and you can see the differences in the last few years. Again the key is that they are listening. This is one of the main reasons I will be getting the Jet 12/20VS. I am confident they will take care of my needs. Lyle

Re: Good news

#2

Re: Good news

Doug Thompson near Cleveland

>Good one Lyle! This is good for us. After you have used it a while let us know your thoughts.

Re: Good news

#3

Re: Good news

Dick Coers

>I think you will really like the machine, but it may be a bit of a heavy travel partner. 98 pounds is of course lighter than a full size machine, but will take some caution to lift and set up.

Re: Good news

#4

New owners?

Carole Valentine

>WMH (Walter Meier Holdings Company) became the parent company of Jet in 1989 and Powermatic about 10 years later, I believe. I think the tools arm of the company has been struggling in the economic climate of past few years, so it is good to hear that they are responsive to customers and don't hide behind an electronic doorman that keeps you from talking to a real person. That attitude will help them to survive.

I have a Jet mini. It took three extensions before I finally got one machined so the beds joined properly. This was after they out-sourced manufacturing to China. WMH just kept sending them and told me to use the previous ones "as boat anchors." Once that problem was resolved, I was extremely happy with the mini and refuse to give it up even though I have a larger lathe now. I am sure you will be pleased with your Jet.

Re: Good news

#5

Re: New owners?

Philip Morris

>Just to echo Lyle's and Carol's comments about Jet's customer service.

I have a Jet 1236 that was purchased in 2004 with a 2 year warranty. The new ones are essentially the same machine and come with a 5 year warranty. This weekend I noticed a small crack forming in the tool rest base. I called (was connected to a human within a minute or two) and asked if Jet retroactively extended the warranty on the older machines sold with the shorter warranty. They said the warranty was not extended. However, without hesitation, Jet customer service said they would send a replacement free of charge.

Don't know how it could get any better than this.