Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Maple Bowl with a Bead

Posts

Maple Bowl with a Bead

#1

Maple Bowl with a Bead

Greg Haugen

>This is the other bowl that came back after the show. It's a traditional Maple bowl, 12" diameter and 5" high with a pronounced bead. Finish is hand rubbed, Tried and True Danish Oil.

Comments Welcome.

Thanks.

Greg H.


img

Re: Maple Bowl with a Bead

#2

Steven Antonucci

Something different at least

steve antonucci

>I think it's good to try new things, although I am not a big fan of the bead on this one. It's somewhat distracting and I'm thiking that's why it came back with you.

But it is better to try something new than do the same thing over and over...

Steven

Re: Maple Bowl with a Bead

#3

Re: Something different at least

Greg Haugen

>Adding a pronounced element is hard to do both by skill level and also trying not to disrupt the form. I think if I had the bead just a 1/16" smaller it would be better. If the bowls wasn't so vertical at the point of the bead, it would be better too. The identical twin to this bowl sold very fast. And this bowl was mentioned as part of the award. One of the things I like about bowl turning is the experimentation and exploration of its forms. The more I looked at it, that's not a good quality photo either. Here's a "retake".

Greg H.


img

Re: Maple Bowl with a Bead

#4

Re: Maple Bowl with a Bead

Richard Jones

>Greg,

I like the bowl and I think because of it's size, 12" d, the bead will actually serve some function if the bowl is used instead of "shelved". Would sure give you somewhere to grab on to if the contents were a bit heavy.

Well executed, and I like the size.

Rich in VA