Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Dirty intake filter

Posts

Dirty intake filter

#1

Dirty intake filter

Paul Zerjay

>Would a dirty intake filter cause a vacuum pump to get hot? My Gast pump gets so hot I can't keep my hand on it for more than just a split second after just a short amount of running time. It looks almost like a sealed unit, so I wouldn't think there is any way of cleaning it. If others run pretty cool, I guess I'll be in the market for a new filter.

Re: Dirty intake filter

#2

Re: Dirty intake filter

Steve in NC

>Could be that the vent ports are dirty. Mine was running hot and I blew it out and it seemed to help. While the outside seemed clear there must have been a bunch of dust inside. The other thing I noticed is that if I have a really tight fit and high vacuum for long periods it will run hot. I solved that by putting a needle valve in my manifold. I can crack it just a bit and the pump runs better because it is always pulling some air.

Steve