Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

scrapers and veritas burnisher

Posts

scrapers and veritas burnisher

#1

scrapers and veritas burnisher

bq in vt

>Hello everyone and time for a stupid question. When using the Veritas burnisher, can you get more than one "burnish"(like with a card scraper) or do you need to go back to the grinder and then remove the grinding burr everytime you want to raise a burr with the veritas device? As always, thank you in advance.

Re: scrapers and veritas burnisher

#2

JL

For card scrapers?

JL

>I can usually raise the burr a couple of times before taking a file or stone to them.

For tools? I don't really know. I just started raising the burr on my scraper tools. I'm using a ceramic slip stone per John Jordan's suggestion. I used to just use the scraper tools off the grinder.

Re: scrapers and veritas burnisher

#3

Re: scrapers and veritas burnisher

John K Jordan

>I sharpen lathe scrapers on the Tormek, hone the top flat, then use the Veritas burnisher several times before resharpening. I find the scrapers only need to be reground rarely.

JKJ

Re: scrapers and veritas burnisher

#4

Dick Hines

Re: scrapers and veritas burnisher

Dick Hines

>I don't burnish my scrapers. When I grind them I do it upside down.With the top of the scraper laying on the grinder table. That way I get a nice raised burr.