Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Nova 1624vs Jet 1642evs 1.5

Posts

Nova 1624vs Jet 1642evs 1.5

#1

Nova 1624vs Jet 1642evs 1.5

k9smith

>I have been searching the archives and it seems that everyone likes each of these lathes. My question is what does the $500 diff get you. I will be using it for bowls and Hollow Forms. I like the heft of the base of the Jet and obviously the speed control. For those of you with the Nova how tough is it to change the belts. I just got back from wood craft and was looking at both of these. The belt adjustment didn�t seem real easy but then again it may be one of those things you get used to.

To be honest I like them both. All things equal I like the Jet better strictly do to the evs. But I'm not sure if it is worth the $500 or not.

I guess I�m asking for recommendations as well as venting a little. Either way I think I will be happy as I have a jet mini now.

Thanks Joe

Re: Nova 1624vs Jet 1642evs 1.5

#2

Re: Nova 1624vs Jet 1642evs 1.5

James Fox

>Have a Jet Mini and took delivery of a Jet 1642 about a month ago. Love the speed control--SO convenient. Also like the ability to reverse for sanding. The sliding head-stock is also a big plus...move everything down to the end and stand there while hollowing--no reaching over the ways. Haven't found anything to dislike about the lathe yet.

James

Re: Nova 1624vs Jet 1642evs 1.5

#3

Re: Nova 1624vs Jet 1642evs 1.5

Ken

>Hi I have the 1624 and I timed it an it takes about 10 sec to change the speeds.I to was looking at both of them and the only benefit to the Jet (to me)was the vs and being that I don't rush any more I chose to save the 500.00 bucks for more tools.I have turned on the Jet a few times and I don't think you will go wrong on either of them.As for power I have turned 18" bowls on the Nova and use the McNaughton coring tool with no problem.Good luck on what ever you choose.

Ken

Re: Nova 1624vs Jet 1642evs 1.5

#4

Re: Nova 1624vs Jet 1642evs 1.5

wilbur

>I don't have either one, but I have been looking hard at the two. My feeling is that it's not a real $500-600 difference. (The difference at Woodcraft is $600.) If you plan on doing longer pieces, you'll need the Nova bed extension which is an extra $200. One consistent comment I've heard from Nova owners is that the stand is on the lighter side, so you may need to get a heavier stand. The one for the Nova is $325. Between the two, the price difference becomes a wash -- $75 for the variable speed.

Of course, if you find that the basic Nova 1624 lathe is heavy enough for your turning needs and that the 24" between centers is enough capacity for you, there doesn't seem to be anything at $999 that can beat it.

Re: Nova 1624vs Jet 1642evs 1.5

#5

Re: Nova 1624vs Jet 1642evs 1.5

Cyril Griesbach

>I don't have either one and have never used either on but I have the PM 3520B. So for me the sliding headstock and EVS would be worth the extra alone but if you consider the heavier legs as well than that's a bonus IMHO.

Re: Nova 1624vs Jet 1642evs 1.5

#6

Re: Nova 1624vs Jet 1642evs 1.5

Mark Trulock

>Hi

I have the Nova 1624 and I really like it after some modifications. I did not like the stand that came with it. The user manual has a plan for a lathe stand. I built my own version of it and added 200 lbs of sand. No vibration problems left.

I had the Jet 1236 and really liked the variable speed. It took me a while to get used to the manual speed control on the 1624. i don't notice the manual speed control much any more, and I love the power of the 1624.

Thanks

Mark

Re: Nova 1624vs Jet 1642evs 1.5

#7

Re: Nova 1624vs Jet 1642evs 1.5

Greg Haugen

>I have the Jet 1642 and love it. The difference? The Obvious EVS is one and the other is the overall quality and stability of the Jet. The stand/legs are very sturdy. The overall machine has "quality" written all over it. Nova, not that it's a bad lathe, is more of a "price point" lathe. The stand is "sub-par", the bed could be thicker, etc. It's like comparing a basic Kia four door sedan, bare bones, to a nice Ford or Toyota four door sedan. Both cars have a V6 and four doors. But it won't take long to feel the "quality" differences of the two.

Buying a lathe is like building a shop, get the biggest you can afford and don't look back.

Just my two cents.

Greg H.

Re: Nova 1624vs Jet 1642evs 1.5

#8

JL

Re: Nova 1624vs Jet 1642evs 1.5

JL

>I bought my 1642 to primarily turn spindles. I wanted the bed length. I like having the EVS, I like have the long bed. I've used a 1624 in a bowl class - it worked well. I don't think it worked as well as my 1642, but I am very used to my 1642.

I made a ballast box and a set of drawers to fit between my 1642's legs. It provides a lot of weight to the lathe and a lot of storage. You would really have to do a lot of building to match it with a 1624.

Re: Nova 1624vs Jet 1642evs 1.5

#9

Re: Nova 1624vs Jet 1642evs 1.5

k9smith

>Thanks guys, I have a feeling that if I would buy the Nova I would have in the back of my mind that I should have gone with the bigger 1642. What the heck its just money, yeah right. This will be my last lathe so I want to get it right.

Joe

Re: Nova 1624vs Jet 1642evs 1.5

#10

Re: Nova 1624vs Jet 1642evs 1.5

John Peck

>Price of Jet 1642 EVS 1.5 at Olsonik - $1,599, plus shipping. To have a Nova 1624-44 that is approximately the same weight and size and has the same features (except for EVS), you would have to purchase the lathe @ $999.99), plus 1 20-inch bed extension @ $159.99, plus outrigger unit @ $269.99, plus cast iron leg set @ $299.99, for a total of $1,792.96, plus shipping (at Craft Supplies' prices; Woodcraft's are similar, except it wants $199.99 for the bed extension). So, it seems that you get more for less if you go with the Jet. I have one and it's a great mid-size lathe.

Re: Nova 1624vs Jet 1642evs 1.5

#11

Re: Nova 1624vs Jet 1642evs 1.5

Jeff Rich

>Over the past Christmas season I purchased a Jet 1642EVS 2HP lathe and I love it! The GF, Cheri, love it as well. The ability to turn at a very low speed for some unusual chunks of wood is great. The 1642 has some heft to it. I have noticed that I can actually get the cut I want as compared to my old lathe, which shall remain nameless, although still in use.

I would try to turn on both lathes and see which one suits you best.

As a side note, I have noticed the Jet bed height is a bit taller than most other lathes.

Re: Nova 1624vs Jet 1642evs 1.5

#12

Re: Nova 1624vs Jet 1642evs 1.5

John K Jordan

>I've had the Jet 1642 for 6-7 years now. I haven't tried that Nova but I wasn't impressed with other models. The variable speed of the 1642 is a real aid since sometimes a change in speed up or down will minimize vibration. Also, the long bed is very handy - not only can I turn a shovel handle when needed but there is plenty of room on the bed for a tool tray and room to slide the tailstock well out of the way when needed.

JKJ

Re: Nova 1624vs Jet 1642evs 1.5

#13

Re: Nova 1624vs Jet 1642evs 1.5

k9smith

>First let me say thank you to every one that posted. As I figured it seemed that for the most part everyone was happy with their lathe. I am sure I would have been happy with either. For me it came down to the fact I was only going to get to do this once so I probably trying too hard to find differences between the two. I liked the heft of the jet and the swivel head of the Nova. I liked the sliding head stock on the Jet and the small foot print of the Nova.

The bottom line is I went with the Jet, I do have enough room for it and if I ever need the additional length I have it. To be totally honest I think I could have been happy with but with the Jet I think it will take a pretty big upgrade for me to move up.

Again thank you all for your help.

Joe

Re: Nova 1624vs Jet 1642evs 1.5

#14

JL

Good choice.

JL

>At least in my opinion :). Consider building a drawer unit/ballast box combination like I did. Dominic has good directions for the ballast box in the articles section. I adapted his directions to set it lower and put a removable drawer unit on top.

Re: Nova 1624vs Jet 1642evs 1.5

#15

Re: Good choice.

k9smith

>Do you happen to have a photo of it?

Re: Nova 1624vs Jet 1642evs 1.5

#16

JL

Here's one

JL

>As I said, I took Dominic's ballast box idea and just put a drawer unit on top. The box is suspended between the two vertical 2 x 4s. The cleats on the ballast box sides hold the box in place.

The drawer unit fits on top of the ballast box. I have cleats screwed to the bottom of the drawer unit that fit into the top of the ballast box.


img

Re: Nova 1624vs Jet 1642evs 1.5

#17

Re: Here's one

k9smith

>Thanks