Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Red Ash HF in Photo Cube

Posts

Red Ash HF in Photo Cube

#1

Andy DiPietro

Red Ash HF in Photo Cube

Andy DiPietro

>Hi Everyone,

How does this photo look?? I did not edit the photo except for cropping. The color is exactly right. This is the first time I used a photo cube.

The cube is 28" square, Alzo Digital with two side light fixtures. I put two 5500K bulbs per fixture. I set my Nikon P5100 to:

+0.7 exposure, +1 was to bright

A - Aperature auto mode

White balance - Preset manual measured reference white card

all other settings were auto

Used a 3 second time delay

Thanks

Andy D.


img

Re: Red Ash HF in Photo Cube

#2

Re: Red Ash HF in Photo Cube

john lucas

>Not bad. The left light looks a little brighter than the right light. I would make that ration greater by moving the right light further away or aiming it less directly at the piece. I would also try to move the left light up higher so it doesn't look so much like a side light.

There seems to be a little flare softening the contrast. Try cleaning the lens and shading the lens from stray light entering the lens. White backgrounds tend to accentuate this affect.

These are minor things to improve the quality. The most important things are to have it in sharp focus and the colors right without too much glare and you've done that. Good job.

Re: Red Ash HF in Photo Cube

#3

Andy DiPietro

Re: Red Ash HF in Photo Cube

Andy DiPietro

>Thanks John,

I will try out those refinements.

Andy D.

Re: Red Ash HF in Photo Cube

#4

Re: Another improvement for consistancy....

Jamie Donaldson

>.....would be to use aperture priority rather than auto if that is available on your camera. Having consistant/controllable depth of field at f11 or f16 is more important than shutter speeds in this situation.

Re: Red Ash HF in Photo Cube

#5

Ric Taylor

Re: Red Ash HF in Photo Cube

Ric Taylor

>Andy,

I think it looks good, but I would put a little more light on the front side. Just my opinion.

Ric