Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

new tools

Posts

new tools

#1

new tools

john lucas

>I had to make a big bowl scraper for a friend and we are having our annual tool auction at the club this month so I decided I would make 2 and donate one to the club. This thing is huge, a 3/4" bar and 3/8" HSS cutter with an Ash handle.


img

Re: new tools

#2

Re: new tools

john lucas

>When I was taking the RAy Key class he had a depth gauge that I loved. I built one for myself and one to donate to the tool auction. The spring loaded locking mechanism is created by using a jig saw to cut the slot which doesn't go all the way through the piece. Then drill a hole down through this for the rod. Drill a hole through the side for a Carriage bolt and your done.


img

Re: new tools

#3

Re: new tools

John K Jordan

>What a thoughtful guy! What huge scrapers!

JKJ

Re: new tools

#4

Dennis in Southern Oregon

Re: new tools

Dennis in Southern Oregon

>Interesting John; can you fill in a few details? Where is the slot and what is its function? Dennis

Re: new tools

#5

Steven Antonucci

Drill a second diagonal hole in the bar

steve antonucci

>and you'll be able to use it as a straight cutter and the angled cutter in the same bar. Just have the hole at some angle pass below where the set screw is and you've doubled the use of the tools.

Picture attached is one that I made a long time ago. Both the middle and lower bars have two holes in the ends that intersect under the set screws.

Saves on space in the rack, as well as cost.

Steven


img

Re: new tools

#6

Re: new tools

john lucas

>I cut the slot from the bottom on one and from the top on the other to see if there is any difference. Doesn't seem to matter they both work. The slot runs parallel to the length for about 3". This acts as a spring to keep to lock the piece of wire (in this case a carbon fiber rod) in place. You put the wood on the lip of a bowl or hollow vessel and push the rod down until it hits the bottom. Then lock it in place with the wing nut. Then you simply put the rod on the outside of the vessel with the wood on the lip and you can instantly see the depth.

Re: new tools

#7

Re: Drill a second diagonal hole in the bar

john lucas

>Steve I have some like that. This is for a friend who simply wants to use it to rough out bowls. It's quick and dirty with this tool but gets the job done.

Re: new tools

#8

Re: new tools

galen V

>Looks like those babies would let you hollow out a tea cup for an Alice and Wonderland ride.

Thought it was illegal to cut down giant redwood trees to turn into bowls!

A little too big for my Jet 1220 but it would be fun just to set it by it and have everyone ask questions how I use it.

Neat!

Re: new tools

#9

Re: new tools

galen V

>Choice of carbon fibre rod is like joining new technology to an old craft. Neat idea! Mine is just a small square of oak with and oak dowl and thumb screw tapped over rod. May I copy your idea and use a brass rod to keep it more low tech? Would rather keep my carbon arrows for bow hunting.

Re: new tools

#10

I need one of those....

Michael Stafford

>Hey John, when you make your next batch of depth gauges make one for me except make mine so that it will span 5 inches or so and measure 5 inches deep. For boxes you know 8)

If you hurry you can bring it to JCCFS....:>

Re: new tools

#11

Re: new tools

john lucas

>I would never use my arrow shafts although I quit shooting before carbon fiber became popular. I have plenty of aluminum and fiberglass shafts.

I went digging through my metal supply and found these rods that I rescued from a large printer. Like everything I scrounge I never actually thought I would use them just hanging on to them in case the price of carbon fiber goes up. :) They were perfect. Non marring, tough and stiff enough to do the job.

Re: new tools

#12

Re: Ohh my Gosh!!! Somebody shrank John!!!

Jamie Donaldson

>

Re: new tools

#13

Dick Hines

Re: new tools

Dick Hines

>Good heavens John you could go gater hunting with those.