Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Aribrush question

Posts

Aribrush question

#1

Aribrush question

BobM

>I am wanting to get an Air Brush to do some coloring on ornaments, and maybe beyond. Knowing that the people on this board have much more experience and knowledge than I have, what kind and model do ya'll recommend? Also, where is a good place to get one. Thanks in advance for your input.

Re: Aribrush question

#2

Re: Aribrush question

Ken Oakley-Sunny St. Cloud, Fla

>I have used Paasche airbrushes since the 1960's and still have 4 in my arsenal. Never met one I didn't like.

Re: Aribrush question

#3

Re: Aribrush question

Darryl

>try these folks. large selection. http://www.airbrushcity.com/

Re: Aribrush question

#4

Re: Aribrush question

Ron in Drums PA

>I've has a dual action Paasche since college, I believe its a VL.

A great airbush that still sold today

Re: Aribrush question

#5

Re: Aribrush question

Bill Howatt

>I have an Iwata double-action.

Paasche, Iwata and others are all good but ensure you get the double-action which allows you to control both the air-flow and the paint-flow. The single-action only controls the air flow. Also, buy only good paints, Golden is one of my favorites, since a lumpy paint on a microscopic scale can drive you nuts - the small dollar savings just isn't worth it.

Since you are knew to this, I recommend you go down to a good art store and find a good sales person (who actually uses an airbrush) to discuss your requirements with them. Then do the decent thing and buy the brush from them after they spent the time helping you.

I use my shop air compressor with a oil/water trap and small regulator near the airbrush station.

Re: Aribrush question

#6

Re: Aribrush question

Tinkerman

>I got excited about an airbrush after attending Binh Pho's demos at the Richmond AAW Symposium.... Did research and ended up buying the the basic set from Binh directly and couldn't be happier. His model is with the cup on the top which is all that he offers, but their are other Iwata models that use bottles... but for most things, seems like this model is more than sufficient... most airbrushing uses very little paint, so couldn't see going the bottle route. Plus, the gravity flow with cup on top has a little better performance than siphoning from a bottle that is hung from below per an air brush instructor that I spoke to at a class. Give Binh a call - here is his web site: http://www.angelfire.com/il2/binhpho/index.html Check out his air brush techniques... amazing.

I got the Awati Hi Line CH model H4100 and most of his airbrush accessories that he had listed on the site which was better than I could get at other sites or retail. Ended up taking a 1 day airbrush class from a local art supply store that was well worth getting over the original familiarity and trying some basic techniques.

As my air compressor is in storage, I ended up buying a separate portable compressor through Amazon (Horizon Hobby) - IWAIS850 Smart Jet Compressor for $217 total... But if you have a compressor, you can get the necessary regulators, filters, etc and should work fine.

Definitely check out www.airbrushaction.com which is "the" airbrush website and magazine for all air brush professionals... it has buyer profiles and comparisons of air brushes, compressors, etc that I used to make/validate my purchasing decisions...

About to use my airbrush decorating my grand-child's nursery using wall paint! Ended up mixing with 50% Golden Medium and sprays great.