Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Why is the 2 HP Jet 1642 so much more?

Posts

Why is the 2 HP Jet 1642 so much more?

#1

Why is the 2 HP Jet 1642 so much more?

wilbur

>I was dreaming about lathes with bigger capacity again, and looking at the Jet 1642 lathes. It looks like that the 2 HP version of the Jet 1642 is about $700 more than the 1.5 HP version, but it looks like from what I can find that the only difference between the two is the motor. I know that 2 HP motors aren't that much more expensive than a 1.5 HP motor, all other things being equal, so that can't explain the huge difference in price.

What gives here? Is there another difference between these two models that I am missing?

Re: Why is the 2 HP Jet 1642 so much more?

#2

Re: Why is the 2 HP Jet 1642 so much more?

twisted whiskers

>No difference...but be sure to notice that the 2 hp motor uses a 230 electrical service.

Re: Why is the 2 HP Jet 1642 so much more?

#3

Re: Why is the 2 HP Jet 1642 so much more?

Pete LaBelle

>When I bought mine 2 years ago, the 1.5 hp was around $1650, and the 2 hp was $1800. I pulled the trigger on the 2hp unit.

You sure you are comparing the same lathes, or have valid pricing ?

The 2hp unit was chosen for a couple reasons.

1) I only wanted to buy this lathe once, so used the "more power is better theory"

2) The 1 hp unit, under a heavy load, would pretty much fill up the 120v circut in my shop, not allowing anything of significant power useage to run at the same time (like my vacuum pump). It runs off the same circut that my tablesaw does. Being independant circuts, I don't have to worry about blowing the cirut with the lathe & vacuum pump on and dropping a bowl.

Re: Why is the 2 HP Jet 1642 so much more?

#4

Re: Why is the 2 HP Jet 1642 so much more?

Gordon Seto

>Assuming your figures are correct.

My guess is Grizzly has a 1642 clone; Jet keeps the 1.5 HP price low to prevent competitors stealing their market share.

Re: Why is the 2 HP Jet 1642 so much more?

#5

Re: Why is the 2 HP Jet 1642 so much more?

Greg Haugen

>I recently bought the 1 1/2 horse 1642. And yes, his pricing quotes are correct. It's $700 more for that 1/2 horse difference. I also had an opportunity to look at both machines side by side. The motors are even the same brands so it's not like one can say "the 2 hp has a better motor like a Baldor or something." They're identical other than that 1/2 horse and 110v to 220v.

I like the lathe, it's a sweet machine. Until my next one, of course. :-))

Greg H.

Re: Why is the 2 HP Jet 1642 so much more?

#6

Pricing

wilbur

>The $700 difference I got from Woodcraft's site.

Jet 1642 1.5 HP: $1599. Jet 1642 2HP: $2299.

I took a look around some other sources as well.

Amazon: $1,599.99 vs. $2,668.00

Rockler: $1,599.99 vs. $2,299.99

Bibb Tool: $1,599.00 vs. $2,165.00

Tool Barn: $1700.00 vs. $2050.00

Tool Barn has the lowest price differential, and would be about what I would expect for the 2 HP upgrade. But in every case, the difference in price is still far above what the actual cost difference is between a 1.5 HP and a 2 HP motor would be, which appears to be $75 or less if you look at McMaster-Carr or Grainger.

Re: Why is the 2 HP Jet 1642 so much more?

#7

Re: Why is the 2 HP Jet 1642 so much more?

Gary in Zirconia,NC

>This isn't out of line. Oneway charges $500 to go from 1 1/2 HP to 2 HP and their both 220 volts. I went with the 3 HP for $1000 more and am glad I did.

Re: Why is the 2 HP Jet 1642 so much more?

#8

Re: Why is the 2 HP Jet 1642 so much more?

john lucas

>The controller is probably different. I know there is a pretty good price jump from a controller that will handle 1/2 horse to one that will take 1 horse because I've been pricing these.

Re: Why is the 2 HP Jet 1642 so much more?

#9

Re: Why is the 2 HP Jet 1642 so much more?

galen V

>If you go to the Jet web site you can compare the two units and it list the differences. The 2 HP gains 46# and probably not just in the motor weight.

Says the 2 HP has changes in legs and tool storage. Not listed, I assume the electronic control has modifications for the bigger Hp or at least a transformer to maybe reduce some internal control components to 120. Think it may be more than just motor to motor.

But then if I sold them and knew the one you would REALLY like, I'd raise the price too!

Re: Why is the 2 HP Jet 1642 so much more?

#10

Re: Pricing *LINK*

John Peck

>Equipment Sales and Service in Auburn, WA, is currently offering the 2hp model for $1,599.99


Equipment Sales and Service-Jet 1642 EVS 2 HP

Re: Why is the 2 HP Jet 1642 so much more?

#11

Re: Why is the 2 HP Jet 1642 so much more?

Gordon Seto

>The Jet specs. on Jet web site doesn't do a good job.

The 1220 VS was listed as twenty some pounds heavier than the non-VS 6-pulley model; actually they were almost identical in weight.

Re: Why is the 2 HP Jet 1642 so much more?

#12

Re: Why is the 2 HP Jet 1642 so much more?

John Peck

>According to the parts diagram in the Jet combined manual for both the 1642 EVS and the 1642-2 EVS, all of the parts for both lathes are the same except for: the motor, the digital readout, the inverter, the braking resistor, the power cord, and the motor label. The inverter on my 1642 EVS (1-1/2 hp) is a Delta model no. VFD007S11A. Don't know the model number for the inverter used for the 2 hp motor. (Note - the bed and the legs used for the 1642 are the same as the ones used for the Jet 1442 wood lathe.) I believe, but could be wrong, that both the 1642 EVS and 1642-2 EVS are now made in China, as is the 1442, instead of Taiwan, based on the crated units I've seen at the local Rockler store.

Re: Why is the 2 HP Jet 1642 so much more?

#13

Re: Why is the 2 HP Jet 1642 so much more?

Clancy Courtney

>Redmond Machinery in Atlanta has scratch and dent 3520B for $1999. At that price,I'd consider it if you're in the market.

Re: Why is the 2 HP Jet 1642 so much more?

#14

I got a better (local) source

Dominic Greco in Richboro PA

>Wilbur,

Call Woodworker's Haven in Southampton PA (Ask for Frank or John and tell them I sent you). Last time I was in there (about a month ago) I saw that they had the 2HP version on sale for about as much as the 1 1/2HP version.

I have the 1 1/2 HP version and you're welcome to come try it out anytime. I bought mine back when they first came out and have used the living heck out of it. In the 5 or 6 years that I've had it, it hasn't let me down once.

Later,

Dominic

Re: Why is the 2 HP Jet 1642 so much more?

#15

contact info

Dominic Greco in Richboro PA

>sorry, forgot to include this:

Woodworkers Haven Incorporated

60 James Way, Southampton, PA 18966

Cross Streets: Between County Line Rd and Jaymor Rd

(215) 953-1955

Re: Why is the 2 HP Jet 1642 so much more?

#16

Re: I got a better (local) source

wilbur

>Hi Dominic,

Thanks for the offer! I'd be real happy to take you up on it - just have to find a free weekend day to do that, which is hard with the two boys, as I'm sure you know.

Take care,

Wilbur