Sycamore
Ken Oakley-Sunny St. Cloud, Fla
>Just picked up a batch of sycamore logs. Need comments on it's turning qualities or lack thereof. Really pretty stuff.
Knowledge You Can Build On — Est. 1998
Sycamore
Ken Oakley-Sunny St. Cloud, Fla
>Just picked up a batch of sycamore logs. Need comments on it's turning qualities or lack thereof. Really pretty stuff.
Re: Sycamore
Gary in Zirconia,NC
>It's in the Maple family and turns like maple.
Gary
Re: Sycamore
twisted whiskers
>I love turning sycamore. It turns great and has some gorgeous grain patterns and coloring in it. HOWEVER, when fresh cut, it typically has a very high moisture content and will move and warp a lot during the drying process.
Re: Sycamore
Barbara Gill, Remlik VA
>Quarter/rift sawn it is real pretty. As Twisted Whiskers said it does move a lot.
Quartersawn planks dried and then turned into platters are real nice.
Re: Sycamore
robo hippy
>It has beautiful meduallary rays to it, but you have to quarter saw it (90 degrees to the pith), for platters, and for bowls, cut the blanks like you would natural edge bowls.
robo hippy
Re: It can be a pain to cut cleanly....
Jamie Donaldson
>...and sand due to its stringy and soft grain, but a coat of acetone thinned lacquer really helps with the process.
Re: Sycamore - NOT in the maple family!
Rob Wallace
>Minor correction:
North American Sycamore is in the genus Platnus, which is in the family Platanaceae.
Maples (genus Acer) are in the family Aceraceae (or more recently, Sapindaceae), which is NOT AT ALL closely-related to sycamores....even though the leaf shape is similar. The flowers and fruits are VERY different, as is the wood anatomy.
One confusion might come from "Sycamore maple" (Acer pseudoplatanus) which is a true maple (i.e. having samaras as fruits, rather than aggregations of achenes as in Platanus, opposite leaves, maple wood structure, etc.). Plane trees are not directly related to maples.
Sycamore does have a fibrous wood structure, and as has been mentioned, needs to be quartersawn to bring out the optimal ray character.
For those that have not tried it, the ray features of sycamore can be accentuated a bit by fuming the sanded piece with strong ammonia vapors - this heightens the contrast between darker rays and lighter xylem. Doing so brings out an even bolder, striking character of the ray fleck in sycamore. The wood does not generally show much chatoyance, at least in my experience.
It is a beautiful wood when finished - I've sold a number of sycamore pieces over the past few years...
Good luck with your recently found 'treasure'...
(Prof.) Rob Wallace
Botanist at Iowa State University and woodturner at home.....!
Re: Sycamore-Pic
Ken Oakley-Sunny St. Cloud, Fla
>Thank you to all who responded. When I first saw the leaves I thought it might be maple but the leaves are much bigger than maple leaves. Also the bark didn't look like maple. Than I thought Sycamore I googled it and verified it is Sycamore. Couldn't wait so I Q/Sed a small cutoff piece and here are some pics. Gonna make some pretty pens when I cut it to pen blank size and sell it on Ebay.
Re: Sycamore-Pic-2
Ken Oakley-Sunny St. Cloud, Fla
>
Re: Sycamore-Pic-3
Ken Oakley-Sunny St. Cloud, Fla
>
Re: Sycamore-Pic
Rob Wallace
>Yup... Plane Tree - Platanus occidentalis
I assume the wood is fairly wet.... there is usually not as much of a color differential in xylem.
I'd turn bigger stuff with it - pens won't bring out nearly as much ray character as would the outer and inner walls of bowls of other vessels. If you do choose the optimal sections, I agree there will be some nice figure for pens....
Have fun!
Rob
Sell it quickly- it won't stay pink!
steve antonucci
>It will dry to a rather boring light cream color. The pink will probably only last a couple of days based upon my experience with sycamore.
I'd also bet that the smaller you cut it, the faster it loses color.
Steven
Rob-Could you give a brief lesson
Ken Oakley-Sunny St. Cloud, Fla
>in fuming with ammonia?
Re: Sycamore
Craig Daymon
>If we are talking about the Sycamore found in the United States, it turns terrific, but it should probably be turned as soon after cutting as possible. It can move quite a bit. I've considered trying to turn a Curt Theobold style vessel with it. He turns thin walled Madrone Burl vessels that change shapes dramatically when they dry. (I think it's Curt that makes these.)
I had some with a deep crimson color when fresh that turned to a reddish tan color when dry. That added a nice touch to the grain. Try to turn your pieces to take good advantage of the fantastic quartersawn patterns. Platters are good if you have some good size QS pieces.
The American Sycamore is NOT a maple. I think the Brits have a wood they refer to as Sycamore that is a maple.
-Craig
I think you mean Christian Burchard
steve antonucci
>Judging by your description of the work, I would have guessed him. If you have "baskets" in your mind, he's the guy.
Steven
Re: Rob-Could you give a brief lesson *LINK*
Rob Wallace
>Hi Ken!
I'll give a brief review of basic ammonia fuming - but will start another thread. Might help search engine(s) in the future if it's not embedded in this 'Sycamore' thread...
You will enjoy the sycamore - it turns and sands nicely, and in my experience, does not clog the paper very much, if at all.
Look for the 'Fuming" thread in a little while....still have some work to do today... ...this day job sometimes gets in the way of the fun stuff...
Rob Wallace
Check out my Woodturning Links page below:
Rob Wallace's Woodturning Links
Re: Rob-Could you give a brief lesson
Don at Central Illinois
>Rob, I wholeheartedly agree, this day job keeps getting in the way of turning and photography. But at least it pays most of the bills. (Sigh)
...you meant Christian Burchard - Yep, sorry
Craig Daymon
>