bowl gouge
bob henry
>I would like to try bowl turning now after have done spindle turning. What size gouge would be best and maufacture. Thanks for any help.
Bob
Knowledge You Can Build On — Est. 1998
bowl gouge
bob henry
>I would like to try bowl turning now after have done spindle turning. What size gouge would be best and maufacture. Thanks for any help.
Bob
Re: bowl gouge *LINK*
Gordon Seto
>You will find some answers here. They are the best tools with price comparable to tools of lesser steel. You have to make your own handle or buy one.
http://www.thompsonlathetools.com/faq.asp
Any size, any manufacturer
steve antonucci
>They will all work on a first bowl.
If you are near other turners, you should ask to borrow their tools first. Make sure they are sharp, and give it a shot. You'll see that the wood doesn't really know any better.
If you decide that you like it, Doug Thompson's tools are great, but you can cut a bowl with any gouge...
Steve
Re: bowl gouge
john lucas
>Bob I just polled a lot of turners for an article I was working on and almost all of them recommended 3/8" or 1/2". Actually most recommended the same thing because the English list their bowl gouges by flute size which converted to inches is 3/8" while American tools are listed by shaft size which is 1/2". An English 3/8" gouge is the same thing as an American 1/2" gouge.
As far as manufacture,Any of the top brands in a HSS or better material. I am a fan of the Thompson tools because I like the flute shape, the tools are prices well, but you do have to make or buy a handle to fit.
Re: bowl gouge *LINK*
Greg Haugen
>Bob,
Here's a link, if I did it right, to the thread that John is talking about. There's a ton of information in it. I currently have a few Sorby's and a Hamlet/Packard. All are M2 HSS, which I'd recommend as a minimum. If I was going to be buy another gouge, which I will soon it would be a Thompson "v" gouge, hands down. You could either buy a handle for it or make one and customize it to your preference. I have a Thompson Detail gouge and it's one of my favorite gouges. I'd stay with either the Thompson tools or Hamlet/Packard/Henry Taylor/Sorby. As far as size, I think the english 1/2" or american 5/8" is a good all around tool. If you make a larger/deep bowl a 3/8"/1/2" can be a little small.
Also by turning a bowl with another turner can greatly reduce the learning curve by following their tips, etc. A few bowl turning DVD's that are available these days are excellent as well. Anything by Mahoney (with or without Batty) or Grumbine, I'd highly recommend.
Welcome to the addiction we call "bowl turning."
Re: bowl gouge
john lucas
>I just got the latest issue of Wood Magazine and they have a very good article on using and sharpening a bowl gouge. I don't know what issue it is, I didn't look, but I got it in the mail last night. It has 200mph wooden car on the front cover. No joke, a student in North Carolina has built an all wooden sports car, 700hp, mid engine really cool machine. I'm hoping Norm will build one and offer plans from the New yankee work shop. :)
NYS doesn't have a budget like that.
James McClure
>I saw some in progress stuff on the website for the car. He did some serious engineering on that thing. It was really an awesome looking car and will probably purr like a kitten at 200mph.
NYWS. Missed the W
James McClure
>
Splinter
James McClure
>Here's the URL for anyone interested:
http://www.joeharmondesign.com/
Re: bowl gouge
Doug Thompson near Cleveland
>Bob, no matter what brand you purchase a 1/2V is enough to turn a 10 inch bowl start to finish, for larger diameter turnings it would be easier using a 5/8 diameter. Add another tool when you see a need.
Re: bowl gouge *LINK*
Doug Thompson near Cleveland
>John, there's a group of guys here that buy old trucks and replace the body with wood panels. Of course they needed wood hats to match the trucks.
Cherry Bronco