chain saw safety - huh?
John K Jordan
>Don't you just love those safety messages. I read this one on the package from a chain depth gauge maintenance kit from Oregon, in bold type:
WARNING: Do not sharpen chain when the saw's engine is running!
JKJ
Knowledge You Can Build On — Est. 1998
chain saw safety - huh?
John K Jordan
>Don't you just love those safety messages. I read this one on the package from a chain depth gauge maintenance kit from Oregon, in bold type:
WARNING: Do not sharpen chain when the saw's engine is running!
JKJ
Re: chain saw safety - huh?
Karen F.
>That's pretty good but my chain saw says "don't stop saw on your thigh!!!" Man, I'm glad I didn't try that:) I guess you can only do that twice (once for each thigh)
Re: chain saw safety - huh?
ken
>Laugh if you will,but I actually saw an idiot do that.He was my superviser,he also would walk around with a running chainsaw on his shoulder and believe it or not,but when I retired he was still walkin on both legs.So maybe some of those dumb warnings ain't so dumb at all.
My neighbor...
steve antonucci
>Nicest guy in the world, but I was helping him clean up a tree that fell in his yard, and asked him if he wanted to do some of the cutting. He had never run a chainsaw before but I assured him it wasn't that difficult.
Started it, showed him how to cut and gave him the saw. He somehow decided that you needed to push down on the bar with one of your hands to make it cut. I got to him just before he squeezed the trigger.
WARNING: Do not touch the sharp spinny thing.
S
Re: Hand on the bar
galen V
>Just the thought of that makes me sick! You just made me decide I will no longer let anyone else use my chain saw. Nicest guy or not they all end up with an attorney and sympathetic jury. I guess I was not thinking in todays legal lifestyle when I loaned out before.
Heck I may not even use again as I'm sure I do not follow all the warnings in my manual, wherever it is.
Re: Hand on the bar
john lucas
>When I have the all day turn-in's at my house I limit who gets to use the chainsaw. I have to be comfortable with the person and their skills before I let anyone near it. I respect that tool more than almost anything else in the shop.
Re: Hand on the bar
bill Crommett
>Another thought : These people vote !
Ever watch some of your buddies cut?
steve antonucci
>I always like to watch how other people use a chainsaw. Before I ever started with my first chainsaw, I was terrified of hacking off a limb, so I read and studied how to use the saw. Never been even remotely in danger from the saw, although I've had some trees go the wrong way or drop a wayward limb my way.
I have seen guys who have been using saws for a long time do some of the dumbest things: drop starts, cutting on the middle of the bar, etc. I won't let anyone else use my saw (anymore). Period.
Steven
Re: Ever watch some of your buddies cut?
mpax356
>Steve, I admit to being a chainsaw newbie. What is a "drop start" and what is wrong with cutting in the middle of the bar?
Re: chain saw safety - huh?
Dick Hines
>The companys put information like that on their products so the people that are trying to win a Darwin Award don't get one from said company's products.
Some where I saw a list of the product safty listing on product packageing. Some one has to know were it it is.
Re: chain saw safety - huh?
Dick Hines
>John when I see something like that in the driections I have to think some nit wit did just that at least once.
It's in the manual :-)
steve antonucci
>A drop start is when you hold the starter cable in on hand and push the saw away from you. The proper way to start a saw is with it on the ground, with on hand on the saw, a foot on the saw, and the other hand on the cable. The saw doesn't move. A secondary choice (according to my Stihl manual) is to hold the saw between your legs and on the cutting handle, and pull up the starter cable. I always start my saw with the brake engaged, just in case I have any momentary lapses in attention.
Cutting on the middle of the bar doesn't engage the anti-kickback pawls on the saw body. They are the spiky things, and they are meant to help arrest any upward forces by being engaged with the wood during the cut. I always cut with the back of the blade and the pawls engaged, and I can't ever recall having a kickback that brought the saw out of the wood.
If I ran a bigger saw, you can bet I'd never ever cut in the middle of the bar. At 1.75 HP, my little Stihl scream through wood, and I don't need it coming towards me in any way, shape, or form.
Steven
The Thinking Might Go . . .
Mark Mandell - Gone Round In Jersey
>"Waaaal, if ah sharpens mah ax with a spinning stone, seems like I could sharpin my spinning blade with a set-still stone. Sher wood make the sharpinin go faster. All them itty bitty teeth are a real pain anyway.
Yeah, and I'm guessin the best place to do that would be up at the tip. Shoot, I may just get me a patent on this! Yessir! We'll be settin' on easy street in no time atol."
Re: Ever watch some of your buddies cut?
John K Jordan
>mpax356,
(Yikes, I started writing this an hour ago and got a phone call. You probably got an answer by now, but what the hay, here it is anyway!)
I'm not Steve, but I think a drop start is sort of a macho thing often used by young treecutters - you hold the starter rope grip more or less stationary and drop the saw away from you. It is not recommended as it is harder to control the saw since it is swinging through the air toward your feet and legs.
It is much safer but less macho to put the saw firmly on the ground, put your foot through the grip, grip the handle at the top, and pull up on the starter rope. The only problem with this method is it is easier to run the chain into the dirt as the saw starts if you are not careful.
I prefer an alternate method - hold the handle of the saw firmly between the legs just above the knees, hold the grip firmly with the left hand, and pull the starter rope.
Cutting in the middle of the bar is more controversial. The safest way in general is to cut with the wood firmly in contact with the bumper spikes. This prevents grabbing and possible kickback. This is especially important with small diameter pieces which can be very grabby. However, there are two times I know of where this is not possible - one, when starting the cut on the top of a large diameter log it is not always possible to contact the spikes until the cut proceeds a bit. It is safer in this case to run the engine very fast - a slow speed can be very grabby. The second time when I might cut in the middle is when cutting with the top of the bar - in that case get a firm grip on the saw and power into the log being careful to keep the tip of the blade from a kickback situation. However, kickback here is almost impossible and if it did happen, the log itself would protect you from the chain. Cutting with the top of the bar is probably not needed much when preparing log sections for turning, but it is widely and safely used when felling and bucking trees, especially when cutting through the middle of a log supported at both ends. If you cut from the top, you will have to use wedges to hold the kerf open and prevent pinching the bar. I probably cut about as much with the top of the bar as the bottom.
BTW, I have never had a kickback in all of my years of chainsawing. I think most of it is being aware of where the tip of the bar is and what it is doing and what will happen if you let it do the wrong thing.
If you are new to chain saws, I recommend reading a book by Dave Johnson called "The Good Woodcutter's Guide". It contains a wealth of information written by someone with experience, not perhaps by someone who simply researched in order to get a book published. It has much detail on ways to be seriously injured or killed with saws and trees.
BTW, I'm preparing a site for a new barn and probably spent 10 hours with the chainsaw in the last week! I had to knock down some big sassafras trees (60+ years old) so I cut some up for turning blanks, the rest firewood. Knocking the trees over with a tractor instead of cutting it down is easier, far quicker, much safer, and doesn't require digging up the stump later. And I had people come today to get roots for sassafras tea. I had to take out a big dogwood tree as well and ended up with hundreds of pounds of dogwood blanks. Dogwood is one of my favorite woods for turning.
JKJ