Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Finally had an opportunity to......

Posts

Finally had an opportunity to......

#1

Finally had an opportunity to......

Jamie Donaldson

>.....get into the "studio" and try out the Hunter tool I brought home from the AAW Symposium. Soft stringy wood like this spalted Scotch pine is a bear to cut smoooothly on the inside, and the Hunter bent tool worked like a champ! Walls are 1/8" and 6"H, and the cuts were nice slices rather than the ragged clumps I usually get from a gouge or scraper.

Re: Finally had an opportunity to......

#2

Re: OOoppps, forgot the pic! 

Jamie Donaldson

>


img

Re: Finally had an opportunity to......

#3

Cool Jamie- glad you like the Hunter tool

john lucas

>

Re: Finally had an opportunity to......

#4

Re: OOoppps, forgot the pic!

mike brazeau

>Nicely done jamie. I just viewed and messages from my new itouch!

Re: Finally had an opportunity to......

#5

Smooth as a baby's.....

Molly Winton

>bum, that's what I get off the Hunter swan neck. It's excellent for leaving an off the tool surface on the interior of my smaller hollow forms. Having the swan neck finally allows me to get a clean finish on my pieces that have wider shoulders.

Re: Finally had an opportunity to......

#6

Mike Stafford

Re: Finally had an opportunity to......

Mike Stafford

>Looks great Jamie. Wait til you try the Hunter on some dense exotics or Osage Orange. The Hunter cutter is happiest when cutting dense woods. Speed is an important part of the cut for the Hunter. I get my best cuts in dense exotics around 2200- gossamer thin onion skin shavings fly out of my boxes.

A very pretty piece of wood and a nice vase form. I like it!