lathe tools
galen V
>Where cn I get 1/4" half round HHS non-Sorby cutters for my Sorby multitip hollowing tool.
Knowledge You Can Build On — Est. 1998
lathe tools
galen V
>Where cn I get 1/4" half round HHS non-Sorby cutters for my Sorby multitip hollowing tool.
Re: lathe tools
Dennis Yoder
>You can order 1/4 round HHS from several sources and grind them to your specs. ENCO, MSC, Little machine shop,Grizzly. Dennis Y
Re: lathe tools
john lucas
>That's what I do however drilling the hole in the pieces takes a special drill bit. I cut slots instead. I do it with an abrasive cut off wheel in my angle grinder but I have done it with a dremel and cutoff wheels. It takes a lot of patience with the dremel.