Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Boring bars, Whos on first?

Posts

Boring bars, Whos on first?

#1

Lyle Jamieson

Boring bars, Whos on first?

Lyle Jamieson

>Anybody remember the Thompson boring bars?? They were not only articulating tips but telescoping. They came in small, medium and large. It was back in the days of the Russ Zimmerman catalog. Late 1970s-1980s?? I believe they were both a first.

The difference today is trying, unsucessfully in my opinion, to transfer the idea from the stiff hand held boring bar with secure articulation or swiveling tip to the flexible articulating arm supported systems. You cant have it both ways you have stiff secure support OR you have flexable articulation. I dont want the arm flexing while I am deep into a hollow form.

Re: Boring bars, Whos on first?

#2

Steven Antonucci

Once you get to a certain size, you are "custom"

steve antonucci

>anyway...

I don't know of any commercially available mass produced products that allow for really deep vessels. I have a telecsoping bar that I have used to 15" on a 14" deep vessel (one cut too many...) that I pieced together from the plumbing department. I can shorten it for less than 12", but I'd normally use a shorter bar anyway.

The thought that one size fits all situations is one of my favorite woodturning idiosyncrasies. The best tool for the job is the one that gets it done. Some times it's supporting the cut, other times, you do the best you can...

Steven

Re: Boring bars, Whos on first?

#3

Re: I still have one of those Thompson .....

Jamie Donaldson

>...hollowing tools, about 6' long when extended, and even use it once in a great while. I remember seeing one about 10' long at David Ellsworth's studio about 1990, and that was probably the incentive for my purchase. I also remember Clay Foster's monster boring bar, supported at 2 points by ropes hanging from the ceiling!

Re: Boring bars, Whos on first?

#4

Steven Antonucci

My biggest bar (so far)

steve antonucci

>A 4' piece of black pipe, with a 3' long by 3/4" bar that "telescopes" into the blackpipe. I've used it about 1/2 way extended with no problems other than it's heavy and tires you out freehanding it.

I wrapped the blackpipe in leather because it was cold and I may just go back and add some wood to the outside. (kind of smallish grip...)

The whole thing cost under $20 to make. If I was bored one day, I'd make a back rest out of some 2x4's.

Steve


img