Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Stu Batty demo, Athens GA - Aug 23rd

Posts

Stu Batty demo, Athens GA - Aug 23rd

#1

Stu Batty demo, Athens GA - Aug 23rd

Jim Underwood

>Classic City Woodturners and the Lyndon House Art Center

Sponsor

Woodturning as Art with Stuart Batty

Saturday Aug. 23rd, 9 am - 4 pm

Lyndon House Art Center

293 Hoyt Street, Athens, GA

$25 admission, lunch included � RSVP by Aug 15

Stuart Batty, who is one of the best woodturners in the world, will be doing an all day demonstration on August 23rd, at the Lyndon House Art Center in Athens, GA. The venue is air-conditioned with comfortable seating. The event will also displayed on monitors. This promises to be quite a show. Lunch is included in the $25 admission � if you respond by August 15th. We�d love to have you come join us for the fun.

For full details and registration information on the Stuart Batty demonstration go here:

http://www.classiccitywoodturners.com/Turning%20Day%202008.html

If we generate enough interest we may also have Stuart teach a 2 day hands on class the following week (Monday/Tuesday). Please contact me at jimunder (at) colemancabinets (dot) com if you are interested.

The Lyndon House Gallery will also be displaying works from several local art and craft groups in their Full House Exhibition, which opens Aug 10th and runs until November. Members of the Classic City Woodworkers will also have pieces entered in this exhibit.

Classic City Woodturners, a chapter of the AAW

www.classiccitywoodturners.com

Lyndon House Art Center

293 Hoyt Street,

Athens, GA 30601

706-613-3623

http://accleisureservices.com/lyndon.shtml

Re: Stu Batty demo, Athens GA - Aug 23rd

#2

just do it...

GaryG in MD

>I was privileged to sit in on two demos by Stuart a couple weeks ago when we had him in DC for Montgomery County Woodturners and Capital Area Woodturners. As a matter of fact, I'm in the middle of writing up that demo article for the August MCW Newsletter right now. It will come out right around the turn of the month.

I can safely say I learned more, and more really important things, in those demos than in any I've ever attended, including Richmond. I have changed some basic techniques in my turning and sharpening as a result.

My recommendation is if you're within a hundred miles, make the time to go see him, and da## the gas. You won't regret it.

...Gary

Re: Stu Batty demo, Athens GA - Aug 23rd

#3

oops, forgot the photo...

GaryG in MD

>Here is a shot of Stuart "floating the bevel" to get a clean cut, free of tear out, chatter, and harmonics. Carefully note the position of his left hand and fingers. The gouge is being guided, not forced. It is cradled between his thumb and fingers in a balanced fashion, not being pushed into the wood. Note that his left hand is not on the tool rest -- the tool rest is not being used as a fulcrum for pushing the tool into the wood. I've already tried this approach, and, needless to say, it works. Dare I say it has revolutionized by approach to turning in general? I think so. If you haven't seen Stuart before, it's a MUST. If you have, you know you want to see him again. ...Gary


img

Re: Stu Batty demo, Athens GA - Aug 23rd

#4

Re: Stu Batty demo

Karen F.

>Stuart put on a demo at our Symposium last year for the San Diego Woodturners Club and we had the 2-day class afterwards. There were only 6 people in the classes and I know everyone learned a great deal. He is one of the most talented turners I have met and I am working on getting him back for the 3-day class he teaches after the 2-day.

I would highly encourage everyone to attend and take the classes offered. You save a ton on travel expenses, lodging and it's a small enough classe for lots on one-on-one time. Good luck and tell Stuart I said "Hi":)

Re: Stu Batty demo, Athens GA - Aug 23rd

#5

Re: Stu Batty demo,TOP notch

John Kyler

>Stuart has been teaching at the Rockler store I was at for quite a while.

The people have always come away very happy.

I have also taken one of his classes (watched many since it was my class/shop).... I would say it is one of, if not the best class I have attended.

Very good instructor and just an all around nice guy...

Where I'm at now I no longer have as large of a class only a DEMO area.

John Kyler

Re: Stu Batty demo, Athens GA - Aug 23rd

#6

Re: Stu Batty demo, Athens GA - Aug 23rd

Jim Underwood

>Hope y'all don't mind me bumping this up once in a while. Love to see y'all there.

Jim

Re: Stu Batty demo, Athens GA - Aug 23rd

#7

read all about it here...

GaryG in MD

>As noted above in this thread, Stuart recently did his thing in DC. If you would like a preview, and a reason to go see him for yourselves, the current (August) issue of the Montgomery County Woodturners Newsletter,

http://montgomerycountywoodturners.org/Documents/MCW%20Newsletter%202008-08.pdf

has an seven-page spread with text and photos, starting on page 8.

You owe it to yourself to see this world-class turner/educator.

Trust me, Gary

Re: Stu Batty demo, Athens GA - Aug 23rd

#8

Re: read all about it here... *LINK*

Jim Underwood

>Thanks for the encouragement Gary.

Just as a reminder, the deadline for the registration (for the included lunch) is Aug. 15th- yes that's this Friday! We'd like to know how many people are going to attend so as to know how many lunches to provide. Please send your check to our treasurer as noted on the linked web page.

I also still have some open slots for the 2 day class we're trying to put together, so if anyone is interested please let me know as soon as possible- jimunder at colemancabinets dot com

Thanks,

Jim


Stu Batty demo details

Re: Stu Batty demo, Athens GA - Aug 23rd

#9

Re: Stu Batty demo, Athens GA - Aug 23rd

Jim Underwood

>Thanks for the encouragement folks.

Just as a reminder, the deadline for the registration (for the included lunch) is Aug. 15th- yes that's this Friday! We'd like to know how many people are going to attend so as to know how many lunches to provide. Please send your check to our treasurer as noted on the linked web page.

I also still have some open slots for the 2 day class we're trying to put together, so if anyone is interested please let me know as soon as possible- jimunder at colemancabinets dot com

Thanks,

Jim

(Sorry for the double post, but the title (re:Read all about it here) didn't make much sense when it showed up all by itself the first time I posted today.)

Re: Stu Batty demo, Athens GA - Aug 23rd

#10

Re: Stu Batty demo, Athens GA - Aug 23rd

Jim Underwood

>Today is the registration deadline for the all day Sat demo w/ included lunch. Please let myself or Stan know so we can make sure provide enough lunches.

The two day Mon/Tues class is filled up. If you'd like to be an alternate, please drop me a line, and I'll put you down in case someone backs out.

gonna be fun!