Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

My first posting of a woodturning

Posts

My first posting of a woodturning

#1

My first posting of a woodturning

Douglas

>I haven't posted a picture before on this web site and thought I would post this one. This was sort of a experiment in that I haven't done a piece like this before. The photograph is not all that good as I did not take much time or care in photographing it.

As I was sanding it I intended to remove all the tools marks but somehow the tool marks in the inside botton of the vase looked like they belong there. So I left some of them. Perhaps I should have sanded it smooth but I didn't.

I not sure this could be consider good or not but I beginning to like it. Comments welcome.


img

Re: My first posting of a woodturning

#2

Re: My first posting of a woodturning

Don Wilcut

>It's yours, be proud!

Re: My first posting of a woodturning

#3

Re: My first posting of a woodturning

GaryG in MD

>Douglas,

Welcome to WC, and thanks for posting your work. Your photo is not all that bad, although I'd like to see the piece from a slightly lower angle, and you could make the photo quite a bit larger (in physical screen size, if not in file size).

It would be helpful if you told us the kind of wood and the size of the piece.

Your design is a bit non-traditional, but different and interesting. I'm certainly not going to fault you for that because it's easy to make a traditional form (I am not saying it's easy to make a traditional form well, because it's not, but that's another story). I hope you do like it, because it's uniquely yours. The rim is interesting, the wall thickness seems appropriate, and it looks like you got a nice finish on it. If you feel that you have tool marks, that will give you something to work at improving in your next one. That's the nice part of woodturning -- you get to do more. You might consider watching a video on bowl making and attending an AAW Chapter meeting near your area.

Looks like you're having fun -- that's what its all about.

Well done, Gary

Re: My first posting of a woodturning

#4

Re: My first posting of a woodturning

Douglas

>Thanks so much for your input Gary. I don�t have the piece in front of me right now but I am guessing the dimension is somewhere around 9 inches high and 6 inches in diameter and is made from green Bradford Pear wood. The tool marks where left deliberately as I though they looked appropriate for the piece. This was sort of an experiment and I wanted to see what it would look like as a finish piece. I came close to just quitting on it as at first as it just looked crappy but I persisted and finish it anyway. At least it came out better than I expected.

I have been turning wood for about 10 years but before I retired I was a tool and die and maker and then a manufacturing engineer, so turning comes fairly easy for me but there is so many techniques that I want to learn how to do well. Seeing all the beautiful work on this forum and others that I participate in sure has set some very high standards for me.

I currently live in Charleston SC and help formed the AAW chapter in Charleston SC about 6 or 7 years ago and became its first president. I have also taught woodturning at Woodcraft in Charleston up to about 3 years ago. This all came to an end when I fell off a ladder and fracture my left leg severely in about 40 places. This put an end to my woodturning and everything else I like doing for about two and half years. I never expected to be able to turn again but a few months ago I was able to start back turning again.

I am now in the process of moving back to my hometown where I will have a two thousand foot workshop and studio. You will never know how it feels to be able to turn again. I have only been able to turn about a dozen pieces since I began turning again a few months and I do have to get the feel of it again. I am hoping that once my moving is completed I will be making a lot of chips. I thought that I would add a little info about me in this post.

I have already contacted a club that is close to me about joining but have not been able to get to any of there meetings. I guess that will have to wait until I complete my moving in a couple of months.


img

Re: My first posting of a woodturning

#5

Re: My first posting of a woodturning

GaryG in MD

>Douglas,

Thanks for your nice newsy post, and welcome back to turning -- that's quite a story. I can just imagine how happy you are to be "back". I know you're looking forward to your new studio. Sounds great. I have to admit, as I get older, I like ladders less and less -- and I've got to go up on the roof tomorrow! (Yes, I'll be very careful -- it's not too far up.)

I like the fact that your turning "out of the box" already. That's the spice. Keep having fun with it. I love the way Bradford pear cuts, but I've found that it bruises easily, so a clean cut is a must. It likes to crack too, so relatively thin pieces are the way to go -- particularly at the foot.

Good luck with your move (where's the new digs?), and we'll look forward to seeing more of your work here. ...Gary

Re: My first posting of a woodturning

#6

Re: My first posting of a woodturning

Douglas

>My new home is in Lancaster SC and a picture of it is on my previous post.I think I must be the only woodturner in the county but there is a woodturning club in NC that is about 25 miles from where I will be living and I hope to meet more woodturners there.

I am sorry I didn't mean for my post to sound newsy. I probably said more than I should have, I am not one to post a lot. I mainly am interested in improving myself and learning new techniques in woodturnng and that is what lead me to this forum.

There is without question some excellent turners on this site and I am sure I can gain a lot by reading their posting and seeing some of the fine work as they post them.