Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

bug question...

Posts

bug question...

#1

bug question...

GaryG in MD

>I just scored a couple nice rounds of osage orange, but they had been down and dirty for a while, and they have an assortment of very precisely round holes on the order of 1/16" - 1/8" in the bark side. (There was an ant colony living in the pith crack of one piece, but I took care of them.) I just got these chain sawed, depithed, debarked, and sealed, into 6 nice half-rounds, but I'm a little afraid to bring them into the basement where I store my drying wood in a dark, cool, controlled environment to retard cracking while I get around to roughing bowl blanks. Would I be correct in assuming that there are probably living critters still in those holes and that it would not be a good idea to bring them into my house? I don't have time to rough turn them right now, and I don't want to leave them outside in our 90+ degree temperatures. What to do? Ideas? Thanks, Gary

Re: bug question...

#2

Re: bug question...

Greg Haugen

>Gary,

A few members in our club have dealt with this by taking the pieces and placing them in a garbage bag and set off a "bug bomb" (fogger) in it and tie it shut. In a day or two take them out and turn them when you're ready. That way you can get them out of the heat but not worry about the bugs. I've heard of this done, I haven't done it. My only caution would be for utility ware for obvious reasons.

Also, alcohol soaking and microwaving-two drying techniques will kill them also.

Hope that helps,

Greg H.

Re: bug question...

#3

Re: bug question...

gtwilkins

>I had some mesquite with similar holes in the planks (only in the sapwood though) and they were stored outside all winter but when I brought them in the house the next year there soon were little piles of dust around the holes.

I put them in the freezer for a couple of weeks and never had any problems after that, still have a couple of pieces and no sign of bugs after 5 years or so.

Trevor

Re: bug question...

#4

Thanks... but keep 'em coming...

GaryG in MD

>Greg, I'm assuming they're some kind of borers. I know that borers are resistant to many insecticides (because I have a borer problem in the trees in my yard, and it's almost impossible to find anything that will kill them, and that at the price of gold bars, since Lindane was taken off the market. They just laugh at stuff like "Raid". If I knww exactly what they are, I might be able to find an appropriate product. But then I hate the idea of working with "contaminated" wood, so I probably won't go that way anyway.

Trevor, All good ideas, but each one is problematic for me. I don't have any room in a freezer (otherwise that sounds like a great idea). Alcohol works great with thin pieces, but in my experience, it makes thick billets crack badly. Same with microwave -- the bugs are in the outside layer, and I'm afraid I'd catch it on fire before killing the bugs -- plus I'm also afraid it would set up stresses in the wood that would lead to cracking.

I've heard that you can sit them in a bag with a capfull of gasoline. I guess I could try that, but how do you know if you've succeeded?

I know one way for sure -- squirt each hole with thin CA glue. Boy do you get a reaction when the glue hits them! It's like a mini volcano! But that messes up the holes, and the holes may end up being part of the decoration. I guess I could try squirting alcohol in each hole -- that might work.

To extend my question to those who may know: if I store this wood in my basement, are the critters likely to come out and infest my house or other pieces of stored wood? Or are they home bodies?

TIA, Gary

Re: bug question...

#5

Re: bug question...

Greg Burnard

>I've used the 20 muleteam borax/water solution on pieces of wood that I suspected harbored the little borers. I mix a concentrated soluion in a spray bottle and give the wood a few soakings. Seemed to work for me.

Re: bug question...

#6

Re: Thanks... but keep 'em coming...

Gary Evans Tallassee, TN

>Hi Gary,

Immerse the sections in mineral spirits, turning occasionally to get all the air bubbles out of the tunnels. Won't hurt the wood. Will kill the bugs.

Gary

Re: bug question...

#7

Steven Antonucci

Tie the garbage bag

steve antonucci

>Without knowing how big the sections are, I think the simple answer is to bring them inside sealed in a bag (tightly). A knot would prevent them from escaping into the house, while the bag should help retain humidity and slow cracking. You'll probably get some mold, but you are going to turn that off anyway.

Plan B is a bin with a lid.

Steven

Re: bug question...

#8

Re: bug question... *LINK*

John K Jordan

>According to Dr Wengart on the WoodWeb, the only sure way to get rid of powder post beetles is to heat the wood. Search the knowledge base there for powder post beetles for the details.

External treatments evidently cannot penetrate to the middle of the wood (even the bore holes are usually tightly filled with frass inside the wood). Beetles in the center may emerge up to a year or more later.

JKJ


http://www.woodweb.com/KnowledgeBase/KBIndex.html

Re: bug question...

#9

Re:I have had positive results by......

Jamie Donaldson

>...placing each piece in a plastic bag with some moth balls. I usually let the bags do their work for several weeks, and it also reduces the cracking that can be exacerbated by bringing outside wood into the usually more dry shop environment.

Re: bug question...

#10

Re:I have had positive results by......

Jim Rutten

>I question the microwave thing. My wife found an ant in the kitchen and since it was near the microwave she scooted him on in and ran it on high for 2 minutes. Nothing. Soon as it was done the ant came strolling out like nothing happened. I think if I would have looked at him with a magnifying glass I would have seen one of those eye protectors like you see with the tanning beds.

Re: bug question...

#11

Re: bug question...

Mike Jones, Redding, CA

>Given that many turners boil as a standard treatment anyway, why not try boiling? An hour in the "soup" ought to discourage those little buggers!

Re: bug question...

#12

Good idea, Greg...

GaryG in MD

>I've used borax on ants before, but didn't know it would handle borers. It's worth a try. Thanks. ...Gary

Re: bug question...

#13

Re: Tie the garbage bag

GaryG in MD

>Steve, If I didn't mind the rot/mold, that would work, but I wax the blanks and let them dry very slowly -- hoping the rot doesn't form in/under the wax. I guess it depends on the type of wood whether the rot is a problem or not. I got a lot of 'blue stain' (I call it "black rot") in maple that way, and I don't like the way it looks. I've never worked with OO before, so I'm not sure what will happen. I wouldn't want to ruin the nice yellow color with rot. (I may get it anyway, because these were on the ground, and it's black under the bark in the areas of ground contact. It's a crap shoot.) Thanks for your thoughts. ...Gary

Re: bug question...

#14

Good idea, Mike...

GaryG in MD

>I haven't set up for boiling (yet), but I've been thinking about it. I believe that most people boil after rough turning, however. I don't know about doing big chunks. It's a thought -- should work. ...Gary

Re: bug question...

#15

thanks, John...

GaryG in MD

>I appreciate the link. I know they're hard to kill -- that's why I really hate bringing them inside. OTOH, if I leave them in the shed, I expect the blanks will be all cracks, due to the excessive heat, before I have time to rough them. So much wood, so little time.... ...Gary

Re: bug question...

#16

Ah, the old moth ball trick...

GaryG in MD

>Thanks, Jamie. That's a good idea. I'd forgotten about those. It's worth a try. ...Gary

Re: bug question...

#17

Re: Good idea, Mike...

Don at Central Illinois

>I do boil occasionally, but only rough turned blanks. I boil for 1 hour per inch of thickness of the rough blanks. You might have to boil a looong time to get to the center.

Re: bug question...

#18

Thanks, Gary...

GaryG in MD

>I appreciate the advice of a professional. I hadn't heard that one before -- makes sense. Thanks a lot. ...Gary

Re: bug question...

#19

True...

GaryG in MD

>but if they die at around 130F like PPBs it shouldn't be too bad. All the more reason for me to get a turkey roaster! ...Gary

Re: bug question...

#20

Re: True...

John Jordan

>I don't know of anything that can/will eat the heartwood of osage. If you have cut away the bark and sapwood, you should be good, but you should be able to see any holes on close inspection.

John

Re: bug question...

#21

A couple of other ideas...

Barry Irby

>Try sealing them in a bag with dry ice. I think I saw dry ice at Kroger grocery store. The idea is to displace the oxygen and smother them. In the end, nothing remains and the wood is not contaminated.

Or try a vacuum bag. (Know anybody with a vacuum veneer system?) Suck the air out and suffocate them that way. Again, no poisons. Or you could confine them in some of those vacuum storage bags you suck the air out of with a vacuum cleaner. Would not kill them but would confine them until you can turn the blanks.

Also, you could try BoraCare. A chemical made of a borate designed to soak into the wood. The problem is that the vehicle is glycol and the glycol is more poisonous than the borate. And apparently Dr Wegert at WoodWeb does not think it works.

Re: bug question...

#22

Interesting...

GaryG in MD

>Thanks for your thoughts, Barry. I hadn't thought of dry ice. That might be interesting to experiment with. I'll pass on the glycol, but some Borax powder might not be a bad idea, per above. ...Gary

Re: bug question...

#23

Thanks John...

GaryG in MD

>That's good to know -- and encouraging. The sap wood is very thin, so that should make it easier to get to them.

If I may ask, what kinds of forms do you like to make out of OO? The wood is so distinctive -- I imagine some things look better than others. ...Gary

Re: bug question...

#24

Re: Interesting...

Barry Irby

>The glycol is the vehicle that carries the borate into the wood and delivers it to the bugs. To poison them, you must have a contact poison. IE, the poison must touch the insect and I doubt you can do that with a powder.

The gases, OTOH do just that, they penetrate all the cavities. That's what gases do.

You could use methyl bromide or viacain, which are what they used to use on powder post beetles in houses, but it would be deadly to you as well, at least until the gases dissipation and then, nothing. No residual effect at all.

The carbon dioxide is not poisonous, but you could in effect drown in it if you insisted on bagging your head along with the blanks. most any gas would do if you can displace the oxygen for a while.

It was mentioned before, but heat will do the job also. Insects die at between 125 and 130. So if you could get them that hot for a while, they'd be toast.

Re: bug question...

#25

baked bug?

GaryG in MD

>Hmmm... let's see. We bake beef, pork, chicken,... why not baked bug?

Since we know that wood doesn't get hurt at 212F (the temp of boiling water), something around 150F - 175F should do the job. I wonder what my wife would say if I told her I was baking bugs in her oven. John Jordan doubts that they get into the heart wood, and the OO has only a very thin layer of sap wood, so it shouldn't take too long to heat up the outer layer to the needed temp. That would be much better than the microwave which would burn up the middle first. I suppose I'll have to put in some newspapers to catch the drips of Anchorseal. The tip of the meat thermometer is a little on the big side, but I might be able to get it into one of the larger holes. This is almost too tempting! I'll let you know if I work up the nerve to do it. ...Gary