>My wife has volunteered my turning the base for a stained-glass lamp she's making for our daughter. Anyone know of a good source for lamp base designs? I'd like my daughter and wife to be able to agree on what they'd like for me to turn -- too much room of error otherwise! At this point all I know is that the base needs to be about 15" tall (before the socket and harp) to be in proportion with the shade that's being made.
>I look in the sunday paper. All the different furniture flyers, Sears, Walmart etc, usually have lamps. I make sketches or cut out the lamps that I like. Another good place is to simply go to a lamp shop. We have 3 in our small town. Not only are they handy for designs but they also carry all the odds and ends connectors to help put the lamp together.
Do you have some pictures of lamps you've made? It's a project I've always thought about-and I'd get to use my skew some more-but never taken the plunge to make one. I don't see many "nice" wooden lamps. I didn't know if it's a lack of spindle turners or the lack of people wanting a wooden lamp? Any pictures or tips?
>I'm having trouble finding my lamps this morning. I must have put them in a folder with other turnings. I make lamps from old ballisters that were removed from our dorms and then donate them to the University for special occasions. They sell well at the fund raising auctions. I'll keep looking for those but I'm taking a RAy Key workshop this week and need to head out the door.
I did find this one. It is a brick lamp that I made by dyeing the wood red and then routing grooves for the mortar. The mortar was drywall mud rubbed into the grooves and then sanded back. The "concrete" was sprayed with Stone flek paint then sprayed white. I made it concrete color by using Primer Gray paint and holding it about 2 feet away and sort of squirted it at the white until it had the look I wanted.
Most of my lamps have been reasonably small table lamps. For larger lamps I scrounge metal that I can put in the base to make the lamp more stable. I've even used a 10lb iron weight lifting weight. I don't have any photos of the big lamps. Just like everyone else I finish some projects just in time to get them out the door and don't have time to take a shot.
>This is the one I did at the Chattanooga demo. The base is seperate as are most of my lamps. I turned this from what ever wood I had available. If I was designing the lamp I would make the curved center section a little different. Possibly a hair larger at the bulge in the bottom and more of a gentle inward curve to the upper part.
I actually screwed up some parts when I was doing the demo because I got in a hurry and there was a knot in the top that was trying to split the lamp. Then while turning the base I took too agressive a cut and got a catch. On purpose of course to make the viewer feel that I'm fallible. :) I had intended to toss it when I got home but the wood just had a nice feel so I mixed up some epoxy and pushed the knot back into place with glue in it. Then I just returned everything and sanded it.
>Whoa! Thanks for the pointer to the book. That's a very interesting resource. I've just spent a very enjoyable few minutes browsing through the book online. Who knew it used to be de rigur to turn at the lathe wearing a long-sleeved shirt, vest, and tie?
>Thanks for the suggestion. We've gone to the thrift store in the past for the bases for my wife's other stained glass lamp shades. This time, I'm to turn the base. It's somewhere in the fine print of our wedding contract. (My eyes are failing me. After 26 years of marriage, only my wife can see well enough to read that fine print...)